Need help?Do you have a question about the Horizon Fitness GR7 and is the answer not in the manual?
General| Type | Indoor Cycle |
|---|---|
| Resistance | Magnetic |
| Handlebar Adjustment | Vertical and Horizontal |
| Seat Adjustment | Vertical and Horizontal |
| Display | LCD |
| Pedal Type | Dual-sided with toe cages |
| Connectivity | Bluetooth |
| Product Weight | 51 kg |
| Max User Weight | 136 kg |
| Display Metrics | Time, Distance, Calories, Speed, RPM, Heart Rate |
| Flywheel Weight | 16 kg / 35 lb |
Read all instructions before using this exercise equipment.
Stop exercising if experiencing chest pains, nausea, dizziness, or shortness of breath.
Instructions on how to move the indoor cycle using transport wheels.
Place the Indoor Cycle on a level surface with adequate space.
Use extreme caution when moving to avoid injury.
Proper saddle height helps ensure maximum exercise efficiency and comfort.
Proper position for the handlebar is based primarily on comfort.
Use the resistance control lever to adjust difficulty and engage the emergency brake.
Key points for safe operation of the resistance and braking system.
Warning about continuous flywheel motion and stopping procedures.
How to adjust pedal straps to hold the foot snugly.
Follow assembly instructions correctly to ensure proper function and safety.
Locate and enter your indoor cycle's serial number.
Overview of the GR7 model components.
Remove packing materials and set up the cycle in a cleared area.
Contact dealer for questions or missing parts.
Connect front and rear stabilizers to the main frame using bolts.
Connect the handlebar to the bottle holder using a plate and bolts.
Secure the handlebar to the console mast using a knob and base.
Connect the handlebar to the console mast using bolts.
Secure pedals to the crank arms with washers and tighten.
Final assembly check and overview of GR7/GR7s specifications.
Addresses frequently asked questions about cycle operation and maintenance.
Answers to frequently asked questions about cycle operation and maintenance.
Troubleshooting steps for squeaking or chirping sounds.
Information needed when contacting customer tech support for service.
Common questions asked by technicians for diagnosing issues.
Wipe down the cycle and inspect for loose parts before each use.
Check flywheel alignment, chain, and crank arms for tightness.
Inspect for rust, wear items, and lubricate moving parts.
Detailed list of GR7 model parts with numbers and descriptions.
Further detailed list of GR7 model parts with numbers and descriptions.
Detailed list of GR7s model parts with numbers and descriptions.
Instructions on how to dispose of the product correctly at its end of life.
To Next Page