Horizon Fitness HORIZON CT5.0 User Manual

HORIZON
SERIES
TREADMILL USER’S GUIDE
FOR MODEL :
CT5.0
CT5.0_Rev.1.1.indd 1 6/3/08 8:39:24 AM

Horizon Fitness HORIZON CT5.0 Specifications

General

Speed Range	0.5 - 10 MPH
Incline Range	0 - 10%
Running Area	20" x 55"
User Weight Capacity	300 lbs
Heart Rate Monitoring	Grips
Display	LCD

Summary

Important Precautions

Save These Instructions

Read all instructions before use. Follow basic precautions, including those for grounding.

Grounding Instructions

Connect to a properly grounded outlet only. Follow local codes and ordinances.

Other Safety Tips for Your Treadmill

Warnings to reduce risk of burns, fire, electrical shock, or injury to persons.

Assembly

Important: Read These Safety Instructions Before Use!

Pay special attention during assembly. Ensure all parts are firmly tightened to prevent noise or play.

Pre-Assembly

Do not attempt to lift the treadmill until specified. Remove plastic wrap from console masts.

Assembly Step 1

Connect left linkage arm and left console mast to the elevation and main frame.

Assembly Step 2

Attach lock latch pin to right folding frame and pull lead wire through right console mast.

Assembly Step 2 (Continued)

Attach right console mast to main frame, connect right linkage arm to elevation frame.

Assembly Step 3

Attach console to console masts using bolts, washers, and springs. Connect console cable.

Assembly Step 4

Attach handlebars to the console using set screws. Connect power plug to outlet.

Before You Begin

Do Not Stand on the Belt

Stand on side rails when preparing. Start belt only after it moves.

Safety Key

Secures to clothing. Cuts power if you fall. Check operation every 2 weeks.

Proper Usage

Tensioning the Running Belt

Adjust rear roller bolts clockwise 1/4 turn to tighten belt if slipping occurs.

Centering the Running Belt

Adjust rear roller bolts 1/4 turn clockwise (right) or counter-clockwise (left).

Conditioning Guidelines

Always Consult Your Physician Before Beginning an Exercise Program.

Essential advice before starting any exercise program.

Stretch First

Troubleshooting

Common Product Questions

Troubleshooting - Treadmill

Provides solutions for common treadmill problems like assembly or console issues.

Problem: If you have attempted to move the treadmill from the box and the machine has sprung open and cannot be assembled.

Problem: The console does not light up and/or the belt does not move.

Troubleshooting steps for power issues, connections, and circuit breakers.

Problem: The treadmill circuit breaker trips during a workout.

Solutions for circuit breaker tripping, likely due to outlet or power strip issues.

Problem: The running belt does not stay centered during a workout.

Problem: Operating speed appears inaccurate.

Warning: Do Not Stand on Running Belt While Calibrating

Safety warning during calibration process. Do not stand on belt.

Please Call Customer Tech Support at the Number on the Back Panel.

Instructions to contact support for unresolved issues.

The Following Information May Be Asked of You When You Call.

Maintenance

Cleanliness of Your Treadmill and Its Operation Environment

Every Month - Important!

Every 6 Months or 150 Miles

Lubrication

Customer Tech Support

Do Not Return to the Retailer

Instructions to contact customer support for assembly issues or missing parts.

For Fast and Friendly Service, Please Contact One of Our Trained Customer Technicians

Provides contact methods: phone, email, and website for support.

Note: Please Read the Troubleshooting Section Before Contacting Customer Tech Support.