What to do if my Horizon Fitness Titan XG60 won't run?
If your Horizon Fitness Dehumidifier isn't running, first ensure the dehumidifier is properly plugged into a working outlet. Also, make sure the room temperature is between 33° and 105°F. If the temperature is outside this range (displaying HI or LO), adjust the room temperature accordingly for the dehumidifier to start operating.
Why is my Horizon Fitness Titan XG60 making a loud noise?
A Horizon Fitness Dehumidifier might make excessive noise if it's not placed on a level surface. Try moving it to a flat, firm ground. Also, a jammed filter mesh can cause noise, so clean the filter mesh according to instructions.
How to fix a Horizon Fitness Titan XG60 Dehumidifier that won't start?
If your Horizon Fitness Dehumidifier isn't starting, the air filter might be clogged. Clean the filter mesh as instructed in the manual. Also, check if the air inlet or outlet is blocked and clear any obstructions.
What does error code E1 mean on my Horizon Fitness Titan XG60 Dehumidifier?
Error code E1 on your Horizon Fitness Dehumidifier indicates a humidity sensor issue. Check that the wire is connected at both ends. If the wiring seems fine, the sensor itself may be faulty.
What does HI or LO error code mean on Horizon Fitness Titan XG60 Dehumidifier?
The HI or LO error code on your Horizon Fitness Dehumidifier indicates that the room temperature is either above 105°F or below 33°F. Modify the room conditions so the temperature is between 33°-105°F and operation will commence. If room conditions are within temperature range, replace defective sensor.
What does error code E3 mean on my Horizon Fitness Titan XG60 Dehumidifier?
Error code E3 on your Horizon Fitness Dehumidifier means the coil sensor has failed and needs to be replaced.
General| Brand | Horizon Fitness |
|---|---|
| Model | Titan XG60 |
| Category | Dehumidifier |
| Language | English |
Record model, serial number, and purchase date for future reference.
Details on power requirements and safety precautions for electrical connection.
Explanation of main operational buttons like Power, Arrow, Mode, and Sensor.
Description of status lights: Humidity Display, Power, Continuous/Defrost, Remote.
Guide for using the optional remote control accessory.
Steps for starting, adjusting settings, stopping, and water drainage.
Procedures for cleaning the machine body, filter, and coils.
Steps for preparing the unit for extended storage.
Guidance on ducting installation and removal for specific applications.
Common issues, causes, and solutions for machine operation.
List of available spare parts for the Titan XG60 dehumidifier.
To Next Page
