How to fix a Horizon Fitness Dehumidifier that won't run?
If your Horizon Fitness Dehumidifier isn't running, ensure the power cord is fully inserted into the outlet. Also, the machine will not restart manually until the room temperature is between 33 and 105 degrees F.
What to do if my Horizon Fitness Eclipse shows Pump Alarm Error Code E2/E4?
If your Horizon Fitness Dehumidifier displays a Pump Alarm Error Code E2/E4, try the following: 1. Reset the unit by disconnecting the power cord and reconnecting it. Note that the unit won't function until the error code is cleared. 2. Manually check if the pump is working. Press the manual drain button to see if the pump energizes and de-energizes properly and if any water is purged from the system. If you haven't cleaned the system recently, check the discharge line for obstructions and clean the pump system. 3. If maintenance isn't enough, replace the hoses or pump.
What does flashing red trouble code mean on Horizon Fitness Eclipse?
A flashing red trouble code on your Horizon Fitness Dehumidifier indicates temperature sensor issues. Check to ensure the wire is connected at both ends. If the wiring looks good, the sensor itself may be faulty.
What does trouble code E1 mean on a Horizon Fitness Dehumidifier?
Trouble code E1 on your Horizon Fitness Dehumidifier indicates humidity sensor issues. Check to ensure the sensor wire is connected at both ends. If the wiring is good, the sensor itself may be faulty.
General| Brand | Horizon Fitness |
|---|---|
| Model | Eclipse |
| Category | Dehumidifier |
| Language | English |
Essential safety guidelines for operating the dehumidifier, including electrical, handling, and maintenance.
Record model, serial number, and purchase date for future reference and assistance.
Information on how to contact customer service for operational questions or issues.
Explanation of the dehumidification process involving humidistat, evaporator, and condenser coils.
Guidelines for area preparation, unit placement, and drain line setup for optimal performance.
Important safety note regarding compressor orientation after moving the unit.
How to turn the unit on/off and understand its basic operation indicators.
Using increase/decrease buttons to set desired indoor humidity levels.
Activating and understanding the continuous operation mode for the dehumidifier.
Instructions for manual water drainage and troubleshooting pump issues.
Explanation of the dual functions of the LED humidity display.
Understanding the meaning of Power, Continuous Mode, and Auto Defrost indicator lights.
Steps to power on the dehumidifier and set the initial humidity level.
Proper procedure to turn off the unit, including fan run-off and pump considerations.
How to perform automatic and manual water drainage, especially for storage.
Information on the condensate pump and its required routine maintenance.
Recommended annual cleaning of the drain system to prevent issues.
Step-by-step guide for basic cleaning using bleach or vinegar solutions.
Detailed steps for advanced cleaning, including pump disassembly and flushing.
Method for cleaning the evaporator coils if necessary.
Instructions for cleaning the exterior of the dehumidifier unit.
How to clean the filter mesh by vacuuming or washing with water.
Correct procedure for reinstalling the cleaned filter mesh into the unit.
Guide for installing the optional supply duct adapter for conditioning adjacent rooms.
Instructions for attaching and detaching flex ducting to the unit.
Solutions for problems like the machine not running, starting, or making loud noise.
Interpretation and resolution steps for specific trouble codes like E1, E2/E4, and flashing red lights.
To Next Page
