Why won't my Horizon Hobby SPEKTRUM RUGGED DX6 connect?
- JJesse EdwardsAug 8, 2025
There are several reasons why your Horizon Hobby Remote Control system might not connect: * The transmitter and receiver may be too close. Move them 8 to 12 feet (2.4 to 3.6m) apart. * Large metal objects might be interfering. Move away from vehicles or other large metal objects. * The correct model may not be selected or bound. Ensure the correct model memory is selected and that the transmitter is bound to the model. * The transmitter may have accidentally entered bind mode. Rebind the transmitter and receiver. * The bind plug may be left in the bind port. Rebind the transmitter to the vehicle and remove the bind plug before cycling power. * The vehicle or transmitter battery charge may be too low. Replace or recharge the batteries.