EasyManua.ls Logo

Horizon Hobby Spektrum SLT2 User Manual

Horizon Hobby Spektrum SLT2
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SLT2 2CH 2.4GHz Transmitter manual
Product specification
Model number:SPMSLT200F(SLT2 2CH TX);
PMN:SPMSLT200
Power supply:4.0V~6.6V;
Working frequency:2.4G;
Transmitted power:<40mW;
Control distance:>100meters;
Battery:4*AA;
Adjust method: Knob adjust & Switch adjust.
Operating temperature:-10~55
Main function
2CH transmitter, It can adjust steering(CH1/ST) TRIMDRREV
EPA. Can adjust throttle(CH2/TH) DREPA.
Low battery voltage alarm.
Warning
Please strictly follow the supply voltage mentioned in the manual. Excessive
supply voltage may cause the equipment to burn.
Transmitter battery is suitable for 4 alkaline batteries, ensure that the
positive and negative batteries are installed correct, incorrect battery polarity
will cause damage to the transmitter! The transmitter uses red LED to indicate
the battery power. When the red LED blinks from steady on to slow, it means
the battery power is low. Please replace the battery in time!
Transmitter
Question and Answer IconNeed help?

Do you have a question about the Horizon Hobby Spektrum SLT2 and is the answer not in the manual?

Horizon Hobby Spektrum SLT2 Specifications

General IconGeneral
TypeTransmitter
Channels2
ModulationFHSS
ProtocolSLT
Band/Frequency2.4 GHz
CompatibilitySLT Receivers
TelemetryNo
Battery4 AA (not included)

Summary

Product Specification

Main Functions Overview

2CH Transmitter Control Adjustments

Explains adjustments for steering (TRIM, DR, REV, EPA) and throttle (DR, EPA) on the 2CH transmitter.

Low Battery Voltage Alarm

Details the low battery voltage alarm function of the transmitter.

Important Warnings

Voltage Supply and Battery Safety

Warns about excessive voltage and incorrect battery polarity to prevent equipment damage.

Battery Installation

Transmitter Controls and Adjustments

Steering (ST/CH1) Operation

Describes how to use the steering wheel to control car steering direction.

Throttle (TH/CH2) Operation

Explains using the throttle trigger for car forward and backward movement.

Steering Dual Rate (ST DR/SR)

Adjusts steering travel range (20%-100%) via the ST DR rotary knob.

Throttle Forward Limit (TH FORWARD D/R)

Limits forward throttle travel (50%, 75%, 100%) using a switch.

Steering Trim (ST TRIM)

Adjusts steering neutral position for straight car alignment.

Steering Reverse (ST REV)

Reverses steering servo direction for custom user setup.

Low Battery Alarm Indicators

Details LED behavior indicating low battery voltage levels.

EPA (Endpoint Adjustment) Setting

Adjusts steering and throttle travel endpoints (left/right, forward/backward).

Advanced Settings and Functions

EPA Setting Procedure

Step-by-step guide to adjust steering and throttle endpoints.

Restore Factory Parameters

Instructions to reset all transmitter parameters, including EPA, to factory defaults.

Calibration Function

Procedure for calibrating throttle and steering neutral points and travel.

Regulatory Information

FCC Compliance Statement

Details compliance with FCC Rules, including interference and exposure limits.

IC Compliance Statement

Information regarding compliance with Innovation, Science and Economic Development Canada's RSS.

Related product manuals