To Next Page
L
lowerynancyJul 27, 2025
Why disconnect the flight battery from the ESC in Horizon Hobby Ultimate 3D?
- KKristen MedinaJul 27, 2025
Disconnecting the flight battery from the ESC is required for safety and to prolong battery life.
Why disconnect the flight battery from the ESC in Horizon Hobby Ultimate 3D?
Disconnecting the flight battery from the ESC is required for safety and to prolong battery life.
Step-by-step instructions for programming Spektrum transmitters.
Detailed steps for assembling the aircraft's wings and struts.
Connecting control surfaces to the receiver and mounting it correctly.
Tips for a successful radio transmitter to receiver binding process.
Steps to assign a transmitter switch for SAFE Select mode selection.
Determining and checking the aircraft's center of gravity.
Adjusting transmitter trims for stable and level flight.
Common problems and solutions related to the AS3X system.
Troubleshooting motor vibration, noise, and power loss.
Addressing issues with control surface movement and response.
Solutions for problems with aircraft binding and transmitter connection.
Troubleshooting reduced flight time, underpowered performance, and reversed controls.
Step-by-step instructions for programming Spektrum transmitters.
Detailed steps for assembling the aircraft's wings and struts.
Connecting control surfaces to the receiver and mounting it correctly.
Tips for a successful radio transmitter to receiver binding process.
Steps to assign a transmitter switch for SAFE Select mode selection.
Determining and checking the aircraft's center of gravity.
Adjusting transmitter trims for stable and level flight.
Common problems and solutions related to the AS3X system.
Troubleshooting motor vibration, noise, and power loss.
Addressing issues with control surface movement and response.
Solutions for problems with aircraft binding and transmitter connection.
Troubleshooting reduced flight time, underpowered performance, and reversed controls.
General| Speed Control | 40A Brushless ESC |
|---|---|
| Approximate Assembly Time | Less than 1 hour |
| Skill Level | Intermediate |
| Charger | LiPo Charger |
| Radio | 4+ Channel |
| Power System | Brushless Outrunner |
| Construction Material | Foam |
| Recommended Battery | 11.1V 3S 2200mAh LiPo |
