To Next PageTo Next Page
Need help?Do you have a question about the Hörmann LineaMatic series and is the answer not in the manual?
General| Brand | Hörmann |
|---|---|
| Model | LineaMatic series |
| Category | Gate Opener |
| Language | English |
Product's intended application, limitations, and lists other required documents.
Explains the meaning of warning symbols used throughout the manual.
Specifies that installation and maintenance must be performed by a qualified specialist.
Provides essential safety guidelines for handling, installation, and operation.
Safety precautions to be observed during the installation process.
Safety measures to ensure safe operation of the gate system.
Safety guidelines for performing maintenance tasks on the system.
Defines terms like hold-open phase, DIL switches, and impulse control.
Defines cycles (reference, reversing) and settings (slow speed, reversal limit).
Explains the standard color identification for cables and components.
Steps to take before starting the installation process.
Procedures for mounting the main operator unit and its foundation.
Attaching the toothed track to the gate for drive engagement.
Connecting power and crucial safety instructions for electrical hookups.
Connecting optional accessories like receivers, buttons, and safety devices.
Connecting emergency stop circuits and safety sensors (photocells, edges).
Setting DIL switches and preparing the system for initial setup.
Teaching the system the fully open, closed, and partial open positions.
Calibrating force limits for safe operation and obstacle detection.
Adjusting slow speed zones and configuring the gate's reversal behavior.
Detailed guide to configuring the operator via DIL switches.
Identification of transmitter parts and guidelines for safe, effective use.
Resetting the transmitter's codes to the original factory settings.
Overview of the built-in radio receiver's capabilities and limitations.
Step-by-step guide to programming remote control buttons to the receiver.
Procedure to erase all stored remote control codes from the receiver.
How to operate the gate manually during a power outage and resume operation.
Interpreting system status indicators (green LED) and error codes (red LED).
Clearing active errors after they have been resolved.
