To Next PageTo Next Page
Need help?Do you have a question about the Hörmann Supramatic E and is the answer not in the manual?
General| Drive Type | Electromechanical |
|---|---|
| Max Door Width | 6 m |
| Opening Speed | approx. 22 cm/s |
| Power Supply | 230 V |
| Remote Control | Yes |
| Motor | 24 V DC |
| Housing | Aluminum |
| Temperature range | -20 °C to +60 °C |
| Radio frequency | 868 MHz |
| Max Gate Width | 6 m |
| Closing Speed | approx. 22 cm/s |
| Operating Temperature | -20 °C to +60 °C |
| Safety Features | Obstacle detection |
| Control Options | push button |
| Max Door Height | 2.5 m |
Crucial safety guidelines for operating and installing the garage door operator.
Essential steps and precautions for ensuring a safe and correct installation process.
Critical warnings and precautions to be observed during operation and maintenance.
Recommendations and guidelines for the proper maintenance of the garage door operator.
Explanation of how to interpret references to figures and symbols in the illustrated sections.
Fundamental information about the garage door operator unit.
Details on the necessary space and clearances for installing the operator.
Instructions for dismantling mechanical latches on sectional doors.
Guidance for sectional doors with a central lock mechanism.
How to fit the door link bracket on sectional doors with off-centred profiles.
Instructions for immobilizing mechanical latches on up-and-over doors.
Specific installation notes for up-and-over doors with ornamental handles.
Information on the operator boom and its applications.
Preparatory steps and considerations before mounting the boom.
Procedures for correctly installing the operator boom.
Explanation of the two available operating modes for the boom.
How to set the limit stops for accurate door travel endpoints.
Information on the toothed belt tension and its adjustment.
Critical guidelines for performing electrical work safely and correctly.
Details on making electrical connections and identifying terminals.
Information on installing and connecting the operator's lighting feature.
Guidance for connecting extra accessories to the operator.
How to connect an external radio receiver for expanded functionality.
Instructions for connecting external buttons for start/stop functions.
Details on connecting the internal push-button unit and its functions.
Steps for connecting a two-wire photocell safety device.
How to connect a self-monitoring wicket door contact.
Connecting a safety device for the closing edge of the door.
Information on connecting the HOR1 option relay for external lamps.
Connecting the UAP1 adapter for control elements and position signalling.
Overview of the operator's control system and menu structure.
How to navigate and select different menus within the operator's control system.
The process of bringing the operator into service for the first time.
Setting the operator parameters to match the specific garage door type.
Programming the operator by learning travel limits and safety devices.
Procedures for resetting the control system to its original factory configuration.
Key guidelines and precautions for the safe and effective use of the hand transmitter.
Instructions for resetting the hand transmitter's codes to the original factory settings.
Programming radio codes, setting partial opening, and reversing limits.
Adjusting parameters related to the operator's lighting functions.
Setting how long the operator's light stays active after operation.
Controlling the operator lighting using radio signals or external push-buttons.
Utilizing the second channel of an external radio receiver for operator functions.
Understanding the operator's standard operating mode and impulse sequence control.
Accessing the special menus (3 through A) via button combinations.
Understanding the display and navigation within special menus.
Configuring the automatic timed closing feature for the garage door.
Configuring and managing the various safety devices connected to the operator.
Setting advance warning phase, options relay, and maintenance indicators.
Adjusting the force limit sensitivity for the door's closing operation.
Influencing automatic belt relief, braking, and speed in the close direction.
Adjusting the force limit sensitivity for the door's opening operation.
Influencing automatic belt relief and braking behaviour in the open direction.
Setting the maximum force limit for the operator's operation.
Details about the type, wattage, and replacement of the operator's spare lamp.
