To Next PageTo Next Page
Need help?Do you have a question about the Hörmann ProMatic 2 and is the answer not in the manual?
General| Frequency | 868 MHz |
|---|---|
| Radio Control | Yes |
| Emergency Release | Yes |
| Max. pulling and pushing force | 600 N |
| Short-term peak force | 750 N |
| Housing | Plastic |
| Temperature range | -20°C to +60°C |
| Warranty | 5 years |
| Power Supply | 230V AC, 50Hz |
| Max Door Height | 2250 mm |
| Max. door height | 2250 mm |
| Opening speed | 14 cm/s |
| Motor | DC motor |
| Mains voltage | 230V AC |
| Motor Type | DC |
| Control | Remote control |
| Safety Features | Obstacle detection |
| Installation | Ceiling-mounted |
Covers essential safety, warranty details, installation, maintenance, and warnings.
Advice on maintenance, hazard warnings, and understanding diagram references.
Explains terms and specifies clearance needed for operator installation.
Steps for installing the operator and making electrical connections.
Covers preparation, deleting data, learning cycles, and initial operation.
Setting forces, radio receiver, and configuring DIL-switches.
Explains DIL-switch settings and basic door operation.
Covers normal use, power backup, mechanical release, and hand transmitter.
Interpreting LED flashes to identify faults and their causes.
Table correlating display codes, causes, and remedies for faults.
Instructions for dismantling and list of optional accessories.
Details on warranty duration, conditions, and purchase requirements.
Details on power supply, motor, connections, and operating parameters.
Table detailing DIL-switch configurations for operator functions and relays.
