Need help?Do you have a question about the Hörmann ProMatic series 3 and is the answer not in the manual?
General| Max Door Width | 5000 mm |
|---|---|
| Pull and Push Force | 600 N |
| Power Supply | 230 V, 50 Hz |
| Remote Control Frequency | 868 MHz |
| Tractive Force | 600 N |
| Motor | DC motor |
| Mains Voltage | 230 V |
| Control Voltage | 24 V |
| Housing | Plastic |
| Temperature Range | -20°C to +60°C |
| Protection Category | IP20 |
| Radio System | BiSecur |
| Motor Type | DC motor |
| Speed | 14 cm/s |
| Installation | Ceiling-mounted |
| Warranty | 5 years |
| Max Door Height | 2250 mm (2500 mm with optional extension rail) |
| Remote Control Range | 30 m |
| Suitable for Door Type | Sectional doors |
| Opening Speed | 14 cm/s |
| Safety Features | Automatic obstruction detection |
| Battery Backup | Optional |
| Remote Control | Hormann BiSecur hand transmitter (number depends on the specific package) |
Covers applicable documents, warnings, definitions, and symbols.
Defines intended/non-intended use and specifies specialist fitter qualifications.
Safety instructions for fitting, maintenance, repairs, and disassembly of the door system.
Inspect door condition and balance before fitting.
Safety guidelines for initial start-up, operation, and hand transmitter use.
Information on safety-relevant functions conforming to standards like EN ISO 13849-1.
Details clearance requirements and fitting the garage door operator.
Details connecting terminals, wiring, and additional components/accessories.
Covers close limit reporting, pre-warning time, external light, automatic timer, and door type settings.
Step-by-step guide for teaching the operator to the door system.
Details on setting force values and safety considerations.
Overview of hand transmitter components, battery, and basic operation.
Process for inheriting/transmitting codes and resetting the hand transmitter.
Explains LED indicators, cleaning, and proper disposal of the hand transmitter.
Details integrated radio module and teaching impulse function buttons.
Teaching partial opening function and using external radio receivers.
Guides on instructing users, checking safety reversal, and normal operation.
Details behaviour during power failure (with/without emergency battery).
Information on the toothed belt tension and its behaviour.
Instructions for replacing the bulb and deleting door data.
Procedure for deleting all learned radio codes from the operator.
Lists optional accessories and provides guidelines for dismantling and disposal.
Details warranty period, conditions, and covered performance.
Excerpt from the Declaration of Incorporation for partly completed machinery.
Provides technical specifications for the garage door operator.
Explains the meaning of different flashing patterns of the operator light.
To Next Page