Need help?Do you have a question about the Hornby R8213 and is the answer not in the manual?
General| Model Number | R8213 |
|---|---|
| Connectivity | Wired |
| Function | Speed and direction control for locomotives |
| Connection Type | Wired |
| Controls | Rotary dial for speed, direction switch |
Steps to connect the main Select unit to the model railway track.
Steps to connect the power transformer to the Select unit.
Explains the process of assigning unique addresses to locomotive decoders.
Details how to set programmable acceleration rates for locomotives.
Details how to set programmable deceleration rates for locomotives.
Explains basic operation, speed control, and direction changes.
Guides on managing and controlling multiple locomotives simultaneously.
Outlines the steps to activate, use, and reset the emergency stop function.
Step-by-step guide to linking two locomotives for coordinated control.
Details controlling three locomotives as a single unit.
Step-by-step guide to unlinking locomotives from a consist.
Steps to reset the Select controller to its original factory settings.
Describes decoders designed for points and trackside accessories.
How to assign unique addresses to points and accessory decoders.
Steps for programming point and accessory decoders.
Addresses issues with locomotives not moving on the track.
Troubleshooting for intermittent power interruptions or system shutdowns.
Details how the system handles electrical overloads.
Explains how the Select unit indicates an overload condition.
Describes the system's built-in overload safety features.
Guides on identifying the source of an overload condition.
To Next Page