Digital Command Control
Digital Command Control
For more information visit: www.hornby.com
Welcome to the digital Hornby World of model railways.You are about to enjoy a new and exciting experience
when it comes to controlling and operating a model railway.
Using the keypad that is on the Select unit locomotives can be “called up” individually and operated just like the
real thing. Imagine a busy marshalling yard where the locomotives are positioned close together and where by
using the Hornby Select Digital Controller, Hornby digital locomotives can be manoeuvred from one place
to another without having to worry about the complexities of having to connect metres of wiring to a bank of
switches and isolating sections and hoping the whole thing will work!
The Hornby Select Digital Control has the ability to address 59 DCC locomotives and 40 points or accessories.
The following instructions are a guide on how to get the best from your Hornby Select Digital Control.
Please take a little time to read carefully through the instructions before you start to assemble the track. Should
you have any questions then you can either contact Hornby via the Hornby DCC website (www. hornby.com),
or write to Hornby using the email address: help.dcc@hornby.com
Hornby Digital Select
Setting Up 5
Quick Start 6
Second Loco Programming 7
Select Unit Additional Benefits 8
Double/Triple Heading 14
Analogue Locomotive Control 16
Locomotive Function Control 17
Re-setting the Control Unit 19
Walkabout Mode 20
Programming Track 22
Hornby Digital Decoder 23
Hornby Digital Points Decoder 24
Making Points ‘Live’ 25
Glossary 26
Trouble Shooting 29
Notes 30
To Next Page
Loading...