To Next PageTo Next Page
Need help?Do you have a question about the HORNER HE-XE102 and is the answer not in the manual?
General| Model | HE-XE102 |
|---|---|
| Input Voltage | 24 VDC |
| Digital Inputs | 16 |
| Digital Outputs | 16 |
| Analog Outputs | 2 |
| Operating Temperature | -20 to 60 °C |
| Type | Controller |
| Communication Ports | Ethernet, RS-232, RS-485 |
| Display | LCD |
Explains safety symbols and critical warnings for safe operation.
Details grounding specifications and procedures for safe installation.
Details panel and DIN rail mounting procedures for the XLE/XLT unit.
Outlines recommended resistance values for proper equipment grounding.
Provides instructions and diagrams for testing ground connections.
Explains how to set IP addresses, Net Mask, and Gateway for Ethernet.
Details HSC modes like Frequency, Count, Pulse Width, and Quadrature.
Explains PWM operation, parameters, and output waveforms.
Provides a detailed map of I/O registers for different XLE/XLT models.
Provides an overview of configuring XLE/XLT hardware and I/O modules.
Guides on configuring digital inputs and high-speed counters.
Explains how to configure analog input modes and options.
Details procedures for backing up and restoring OCS data for reliability.
Details the process and warnings for updating device firmware.
Explains how to establish and troubleshoot connection status with Cscape.
Provides status indications and troubleshooting checklists for local controller and I/O.
Offers troubleshooting steps and guidelines for setting up a CsCAN network.
Lists contact information for technical support in North America and Europe.
