9 10
Saddle Bell & Reflectors
a. Loosen the seat post clamp using a 5mm Allen key.
a. Attach the bell on either the left or right handlebar as close to the handgrip
as possible using a Phillips screwdriver.
b. Attach the white reflector onto the handlebar next to the stem and the
red reflector on the seat stem next to the seat-post clamp using a Phillips
screwdriver.
b. Children’s bikes are not fitted in the same way as adult bikes: adjust
the saddle position so that your child can comfortably put their feet on the
ground to minimise the risk of falling.
c. Tighten seat post clamp securely (8Nm).
As they grow in confidence and ability you can increase
the saddle height so that they are able to touch the
ground with the balls of their feet, and put more power
into their pedalling.
The seat post has a height limit shown by hatch lines
around the tube. Do not exceed this – instead it’s time
for an upgrade. Bought the wrong size? See our HERO
return policy here: hornit.com/heroreturns
To Next Page