horsch LEEB 4 LT - User Manual

Questions and Answers

H
Hunter Jacobs PhDAug 11, 2025
What to do if the required application quantity is not reached on Horsch Farm Equipment?
- D
  David BrownAug 11, 2025
  If the required application quantity isn't reached on your Horsch Farm Equipment, it could be due to high travel speed or low pump drive speed, or clogged nozzles/filters. Try reducing your travel speed and increasing the pump drive speed. Clean the nozzles and nozzle filters by unscrewing the nozzles and blowing them out with compressed air. Regularly check the suction and pressure filters.
J
Janice Cooper DDSAug 17, 2025
How to fix a pump that does not prime on horsch LEEB 4 LT Farm Equipment?
- C
  conleydonaldAug 17, 2025
  If your Horsch Farm Equipment pump isn't priming, a blockage in the suction side (suction hose) or fitting may be the cause. Remove any blockage. Alternatively, the pump might be drawing in air. In this case, check the hose connection on the suction hose for leakage.
K
Karen SmithAug 25, 2025
What to do if the pump does not generate any power on Horsch Farm Equipment?
- K
  Kathy LeeAug 25, 2025
  To resolve a pump that doesn't generate any power on your Horsch Farm Equipment, replace the ball valves if they are jammed or damaged. Also, check the hose connections on the suction hose for leak tightness, as the pump may be drawing in air, indicated by air bubbles in the spraying mixture tank.
T
Tyler ReidAug 29, 2025
Why does main cleaning process stop at internal cleaning on horsch LEEB 4 LT Farm Equipment?
- S
  Sherry LopezAug 29, 2025
  If the main cleaning process stops at internal cleaning on your Horsch Farm Equipment, it's likely because the manual switch-over ball valve for internal/outside cleaning is set to outside cleaning. Switch the valve to internal cleaning to resolve this.
K
Kenneth SweeneySep 4, 2025
How to comply with the permitted spraying pressure range of the installed spraying nozzles on horsch LEEB 4 LT Farm Equipment?
- A
  Angel MoralesSep 4, 2025
  To correct the spraying pressure range on your Horsch Farm Equipment, adjust the travel speed to align with the determined range for spraying operation.