To Next PageTo Next PageWhat to do if my horsch Farm Equipment is plugging when running?
If the entire horsch Farm Equipment is plugging during operation, it's likely due to a ground speed that's too slow or a working depth that's too deep. Increase ground speed up to 10 mph, reduce the tillage depth, and rephase packer cylinders.
How to fix horsch RT-Next GEN Joker that does not track straight?
If the horsch Farm Equipment isn't tracking straight, it's probably not level from front to back. You can adjust the hitch tilt cylinder (manual depth) or adjust the Hitch Height (electronic depth).
Why is my horsch Farm Equipment lifting slowly?
If the horsch Farm Equipment lifts slowly, the tractor SCV might not be set to 100%, or there could be excessive soil buildup on the machine. Set the SCV to 100% and remove any accumulated soil from the machine frame.
What to do if the wings of my horsch RT-Next GEN Joker Farm Equipment plug when running?
If the wings of your horsch Farm Equipment are plugging during operation, it's likely that the wings aren't running level. Reduce wing pressure so wings are level by setting to Flat and adjust the Gauge Wheels.
What to do if my horsch RT-Next GEN Joker doesn't stop at the desired depth?
If the horsch Farm Equipment doesn't stop at the desired depth (electronic versions), the cylinders may not be reaching set points before the hydraulic flow stops. To resolve this, adjust the set Target Depth and verify that Autotune is enabled.
What to do if horsch RT-Next GEN Joker Farm Equipment stops then continues past desired set depth?
If the horsch Farm Equipment stops and then continues past the desired set depth (electronic versions), the SCV might still be active after all cylinder movement has stopped. Verify that Autotune is enabled and perform the Calibration Up/Calibration Down function.
Why does my horsch Farm Equipment act erratically and not maintain consistent depth?
If the horsch Farm Equipment acts erratically and doesn't maintain a consistent depth, the SCV lever is possibly being operated multiple times per lift/lower cycle. Rephase the packer cylinders (manual depth) or verify that Autotune is enabled (electronic depth).
Provides guidance on safe operation, manual importance, and HORSCH policies.
Instructions for completing and returning the machine registration form for warranty.
Details the warranty period, claim submission process, and contact information.
Forms for customer, dealer, and HORSCH copies of machine registration.
Checklist for dealers to ensure proper machine delivery and customer information.
Details machine serial number identification and location on the machine.
Explains warning symbols, safe operation, and requirements for authorized operators.
Outlines the process for initial installation and service by dealers/representatives.
General safety warnings and the importance of understanding warning symbols.
Guidelines for safe operation, including caution on negative tongue load.
Instructions for using a signal person when visibility is obstructed.
Specifies necessary protective clothing for operation and maintenance.
Explains the importance and use of a safety chain for drawn equipment.
Regulations and precautions for transport on public roads.
Importance of lights, signals, and reflective materials for road safety.
General advice and precautions for preventing accidents.
Safety precautions during hitching and unhitching operations.
Safety steps to follow when changing machine implements.
Essential safety measures to follow during machine operation.
Procedures and safety measures for extracting stuck machines.
Safety measures to be taken before performing maintenance.
Safety precautions when operating hydraulic functions.
First aid and safety procedures for oil exposure or spills.
Provides technical specifications for the Joker RT-18 model.
Provides technical specifications for the Joker RT-25 and RT-28 models.
Provides technical specifications for the Joker RT-32 and RT-35 models.
Provides technical specifications for the Joker RT-40 model.
Shows visual representations of RT22 and RT40 models.
Details tire inflation and wheel lug torque specifications.
Instructions and warnings for connecting hydraulic lines safely.
Safety precautions for hydraulic connections and fluid handling.
Information and safety regarding the pressure accumulator.
Precautions for service and maintenance of hydraulic systems.
Covers initial operation, delivery, and installation procedures.
Guidelines for transporting the machine on roads or trailers.
Warnings and procedures for operating hydraulic functions.
Details pin descriptions and checks for road lighting.
Safety and procedures for hitching and unhitching the machine.
Steps to connect and verify road lighting equipment.
Procedures and safety for parking the machine correctly.
Recommended procedures for cleaning and storing the machine.
Step-by-step instructions for folding all machine models.
Step-by-step instructions for unfolding all machine models.
Explains the process of rephasing hydraulic cylinders.
Lists common operational issues and their solutions.
Adjusting wing pressure for level operation.
Setting and leveling the machine using electronic controls.
Adjusting hitch height to correct machine tracking.
Setting working depth using manual controls.
Adjusting stops for leveling and tracking with manual controls.
Function and setting of gauge wheels for depth control.
Function and adjustment of caster wheels on RT40 models.
General maintenance for caster wheels and pivot points.
Maintenance for discs and bearing hub units, including bolt torque.
Specific cleaning advice for disc hubs and bearings.
Illustration of hub unit bearing components.
Step-by-step guide for assembling hub unit bearings.
Overview, setting, and maintenance of the RollFlex packer system.
Overview, setting, and maintenance of the RingFlex packer system.
Step-by-step guide for mounting packer bearings and assemblies.
Step-by-step guide for disassembling packer bearings.
Information on the optional rear tow hitch for RT40 models.
Function, setting, and maintenance of the Edge Disc system.
Servicing the Edge Disc hub bearing.
Information on the optional end cover for the RollFlex packer.
General guidelines for machine maintenance and servicing.
Recommended cleaning procedures and precautions.
Factors affecting maintenance intervals and their importance.
Procedures for storing the machine during long periods.
Importance and frequency of machine lubrication.
Lubricant handling, hygiene, and safety precautions.
How to contact HORSCH for service and support.
Detailed schedule for preventative maintenance tasks.
General advice on pre-operation checks and wear item replacement.
Visual guide to lubrication points on the machine.
Visual guide to further lubrication points on the machine.
Common operational issues and their solutions.
Table of torque values for metric bolts.
Table of torque values for imperial bolts.
General| Brand | horsch |
|---|---|
| Model | RT-Next GEN Joker |
| Category | Farm Equipment |
| Language | English |
