Horstmann CentaurPlus C27 User Manual


With the CentaurPlus C27 programmer operating in the normal running mode it is possible
to alter the functionality of the programme on each individual channel by means of the CH
and HW buttons.
The options include;
  - Channel follows all programmed ‘ON’ and ‘OFF’ times.
  - Channel operates from 1st ‘ON’ time until 3rd ’OFF’, ignoring all
switching times in between.
  - Channel will be constantly ‘ON’.
  - Channel will be constantly ‘OFF’, there is the ability to turn off the
heating during the summer without altering the programme times.
On the hot water channel the boost is still available. As both channels
are totally independent it is possible to have them set differently if
necessary.
All of the settings above will be permanent, i.e. unaffected by programme times, until
alteration by the user.
The diagram below illustrates how to alter the setting, it assumes that the channel is in the
AUTO mode to begin with.









































   
 
4
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
HW CH HW CH HW CH HW CH
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
AUTO
ALL DAY
24 HRS
OFF
6:35
PM

Horstmann CentaurPlus C27 Specifications

General

Channels	2
Programs per Day	3
Boost Function	Yes
Holiday Mode	Yes
Power Supply	230V AC 50Hz
Display	LCD
Override Function	Yes
Installation	Wall-mounted
Programming Period	7 days
Battery Backup	Yes
Compatibility	Compatible with most heating systems