Horstmann ChannelPlus H27XL Series 2 User Manual

8
Adjusting Default Settings
The ChannelPlus H27XL Series 2 has a number of default settings which are normally
installed. These settings are designed to reduce the need for user intervention upon
installation of the programmer. However it is possible to customise the user display by
following the procedures in the following pages. The factory default normally installed are
illustrated below;
Time and Date
Options
Clock Options
Options
Headings
Options
Time and calendar
are factory set
The programmer has been
preset with the current
time and date during
manufacture.
No alteration should be
required to the time and
date. However, if any
modication is required
please refer to the
owchart on page 9
Time displayed in
24hr clock format
24 hour
or
AM/PM
Channel heading set to
standard installation
ie. Hot Water and Heating
Heating/Water
Zones
Channels
 
 

10.42
22.42

Horstmann ChannelPlus H27XL Series 2 Specifications

General

Type	Central Heating Programmer
Channels	2
Display	LCD
Power Supply	230V AC 50Hz
Mounting	Wall Mounted
Override Function	Yes
Contact Rating	3A
Maximum Load	3A
Boost Function	Yes
Compatibility	Compatible with most heating systems