Note: The charging station should be positioned on the outer edge of the surface to
be mowed on the boundary wire. It cannot be positioned next to a storage room or a
garden house placed like an island in the middle of the surface to be mowed.
Installation
A) The location of charging station must be even, firm and convenient to use the power
source. There must be no obstacles or corners within 2 meters in front.
B) First fix the front part of the fence line under the charging station. The distance to the
lawn edge should not less than 40cm. Then correspond the fence line to the grooves under
the charging station, and fix the charging station with pegs.
C) Please ensure that no objects or other items are located in the area marked in red in
below picture, that obstruct the robotic lawnmower during edge cutting.
1. Installation of Charging Station:
Note: The charging station must face the anticlockwise direction of the fence line. The
charging station is forbidden to be put on any inclined surface.
To Next Page
Loading...
Need help?
General