Horwin EK3 - Page 10

9
②
Steering lamp
Turn the switch to the left to turn
on the left turn signal;
Turn the switch to the left to turn
on the left turn signal;
Turn the switch to the middle
position to reset the switch, and
turn off the left/right turn signal.
⑥
Gear mode
Press the left, middle and right
buttons to adjust the gear
③
Horn
After pressing the horn button,
the horn rings; after releasing the
horn button, the horn stops
ringing.
⑦
Warning Lamp(double
flash)
Press the button, then the left and
right turn signals flash
④
Cruise Control
Press the button to keep the
motorcycle running at the current
speed
To release this state, press this
button again or accelerate/brake
the motorcycle.
⑧
Start\ reverse switch
Click the button to enter the
Ready state
Press the button to enter the
reverse mode, and release the
button to enter the forward mode