EasyManua.ls Logo

Hoshizaki IM-100 User Manual

Hoshizaki IM-100
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NO. E1AP-433
ISSUED: APR. 30, 1997
REVISED: JUL. 29, 2005
HOSHIZAKI
SELF-CONTAINED CUBER
MODEL IM-21 IM-100
IM-25 IM-130
IM-30 IM-160
IM-45 IM-240
IM-65
SERVICE MANUAL
Kälte-Berlin
Inh.: Christian Berg
Am Pfarracker 41
12209 Berlin
Fon: +49 (0) 30 / 74 10 40 22
Fax: +49 (0) 30 / 74 10 40 21
eMail: info@kaelte-berlin.de
Internet: http://www.kaelte-berlin.com
Direktlink Hoshizaki Zylindereisbereiter IM130ME-C zu Kälte-Berlin

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hoshizaki IM-100 and is the answer not in the manual?

Hoshizaki IM-100 Specifications

General IconGeneral
Daily Ice Production100 lbs
CondenserAir-Cooled
Height39 inches
Storage Capacity30 lbs
RefrigerantR-404A
Voltage115V
Weight125 lbs
Ice StyleCube
Water SupplyPotable

Summary

I. SPECIFICATIONS

1. DIMENSIONS/CONNECTIONS

Displays physical dimensions and connection interfaces for various ice maker models.

III. INSTALLATION INSTRUCTIONS

4. ELECTRICAL CONNECTIONS

Critical steps for safely connecting the icemaker to the power supply.

5. WATER SUPPLY AND DRAIN CONNECTIONS

Instructions for connecting water inlet and drain lines according to regulations.

V. MAINTENANCE INSTRUCTIONS

1. PERIODICAL CLEANING

Routine cleaning procedures for the exterior, scoop, and interior storage bin.

4. ICEMAKING WATER SYSTEM

Guidelines for cleaning and sanitizing the internal water system to ensure hygiene.

VII. SERVICE DIAGNOSIS

1. NO ICE PRODUCTION

Troubleshooting guide for diagnosing and resolving issues related to no ice production.

2. LOW ICE PRODUCTION

Troubleshooting guide for diagnosing and resolving issues related to reduced ice production.

3. ABNORMAL ICE

Troubleshooting guide for diagnosing and resolving issues related to ice shape or quality.

4. OTHERS

IX. REMOVAL AND REPLACEMENT

1. SERVICE FOR REFRIGERANT LINES

Information and procedures for servicing refrigerant lines, including safety and handling.

2. COMPRESSOR

Steps for removing and replacing the compressor unit.

3. DRIER

Procedures for removing and installing the refrigerant drier.

4. EXPANSION VALVE

Steps for removing and replacing the expansion valve.

5. EVAPORATOR

6. HOT GAS VALVE

7. WATER REGULATING VALVE - WATER-COOLED MODEL ONLY

14. CONTROLLER BOARD

Related product manuals