Need help?Do you have a question about the Hoshizaki IM-500SAA and is the answer not in the manual?
Details on voltage, current, wattage, fuse size, and breaker ratings for the ice maker.
Physical dimensions, port sizes for electrical supply, water inlet, and drain.
Pre-installation checks including inspection, panel removal, and component verification.
Step-by-step guide on removing the front, top, left, and right side panels.
Guidelines for selecting an appropriate installation site, considering temperature and clearance.
Instructions for unpacking, positioning, and securing the icemaker onto its storage bin.
Procedures and safety warnings for connecting the unit's power supply, including grounding.
Details on connecting water supply and drain lines, including pressure and pipe requirements.
A comprehensive list of checks to ensure proper installation before startup.
Steps to initiate the icemaking process after installation, including safety notices.
Information on the unit's display for normal operation and error codes.
Recommendations for regular cleaning of the icemaker unit.
Detailed steps for cleaning internal components and the water tank.
Steps for sanitizing the icemaker after cleaning using a bleach solution.
How to clean and maintain the stainless steel surfaces to prevent corrosion.
Instructions for cleaning the ice storage bin and scoop.
Guide on checking and cleaning the air filters to maintain performance.
How to inspect and clean the condenser unit annually.
Procedures for preparing the unit for extended periods of non-use or cold storage.
Detailed steps for draining the water tank to prevent freezing.
To Next Page
General