(1/13)
Models : KM-40B, KM-55B, KM-80B
- Don't pull the gasket extremely while attach
- If the length of gasket is long, please cut it properly to adjust
No. Figure Note
1
*Open the Door and Remove the shipping
tapes for taking off the Water Tank
2
*Remove the Drain Pipe
3
*Take off the Water Tank by snapping off and
lifting off
4
*To take off the Water Tank, it should be slid
towards you and lifted down
5
*Disconnect the Hose to the Pump Motor
outlet
*Cut the cable tie to disconnect the Hose
*Don't cut the Hose
HOW TO REPLACE THE GASKETS
Rework Time : Approx. 35min
To Next Page
Need help?
General