Need help?Do you have a question about the Hoshizaki KM-255BAH and is the answer not in the manual?
Detailed technical specifications for the KM-255BAH air-cooled model.
Detailed technical specifications for the KM-255BWH water-cooled model.
Diagrams and component identification for the KM-255BAH model.
Diagrams and component identification for the KM-255BWH model.
Explanation of the icemaker's operational cycles: fill, harvest, and freeze.
Overview of the solid-state control board and its features.
Detailed explanation of control board features, including safeties.
Guidance on dip switch settings and other control board adjustments.
Visual representation of the water and refrigerant flow paths.
Electrical schematics for the icemaker models.
Data on ice production, consumption, and cycle times under various conditions.
A quick diagnostic sequence to identify common operational issues.
Charts listing problems, causes, and remedies for various malfunctions.
Procedures for safely handling and charging refrigerant.
Detailed instructions for removing and installing the compressor.
Procedure for removing and installing a new refrigerant drier.
Guide for removing and installing the evaporator unit.
Steps for removing and replacing the thermistor component.
Steps for removing and replacing the pump motor.
Detailed steps for cleaning the icemaker unit and its components.
Steps for sanitizing the icemaker after cleaning, using a chlorine solution.
Guidance on cleaning exterior panels and the ice storage bin.
Procedures for air filter maintenance and preparing the unit for long storage.
To Next Page
General