Need help?Do you have a question about the Hoshizaki KM-250BWF and is the answer not in the manual?
General| Condenser | Air-cooled |
|---|---|
| Refrigerant | R-404A |
| Voltage | 115V |
| Production Capacity | 250 lbs/day |
| Ice Type | Cube |
| Power Supply | 115V/60Hz/1Ph |
Detailed technical specifications for the Hoshizaki KM-250BAF icemaker.
Detailed technical specifications for the Hoshizaki KM-250BWF icemaker.
Visual overview of the KM-250BAF icemaker's internal and external components.
Visual overview of the KM-250BWF icemaker's internal and external components.
Explanation of the solid-state control system and controller board features.
Diagram illustrating the water and refrigerant circuits for KM-250BAF.
Diagram illustrating the water and refrigerant circuits for KM-250BWF.
Comprehensive electrical wiring schematic for both models.
Chart detailing the operational sequence and timing of icemaker functions.
Key performance indicators and data under various conditions.
Step-by-step guide to diagnose and fix no ice production issues.
Diagnosing and resolving problems related to evaporator freezing.
Identifying and fixing causes of reduced ice output.
Addressing issues related to ice shape or quality.
Solutions for miscellaneous operational problems.
Procedures for refrigerant recovery, evacuation, and recharging.
Safe and effective methods for brazing refrigerant system components.
Step-by-step instructions for replacing the icemaker compressor.
Guide for removing and installing the refrigerant drier.
Instructions for removing and replacing the expansion valve.
Steps for removing and installing the hot gas solenoid valve.
Guide for removing and replacing the evaporator assembly.
Steps for removing and installing the water regulating valve on water-cooled models.
How to adjust the water regulating valve settings on water-cooled units.
Steps for removing and installing the temperature sensing thermistor.
Guide for replacing the fan motor on air-cooled models.
Steps for removing and installing the main water inlet valve.
Instructions for removing and replacing the water pump motor.
Guide for removing and installing the float switch.
Steps for removing and installing the ice spray tubes.
Procedures for preparing the icemaker for extended periods of non-use.
Detailed steps for cleaning and sanitizing the icemaker system.
Recommended regular maintenance activities for optimal performance.
To Next Page
