Why does my Hoshizaki LANCER S4E V3 Hi-Carb Superchiller Chiller water have a rusty appearance?
If the water from your Hoshizaki Chiller has a rusty appearance or metallic taste, it's likely due to a poor and contaminated water supply. A carbon filter is required.
How to fix CARB TIMEOUT error on Hoshizaki LANCER S4E V3 Hi-Carb Superchiller?
To fix a CARB TIMEOUT error on your Hoshizaki Chiller, check the water supply, look for blockages in the system, and inspect tubing downstream. Check the control board. If everything seems fine, try increasing the timeout setting (e.g., from 5 to 8 minutes between off cycles). Cycle the power at the wall to reset.
General| Model | LANCER S4E V3 Hi-Carb Superchiller |
|---|---|
| Category | Chiller |
| Manufacturer | Hoshizaki |
| Refrigerant | R404A |
| Voltage | 230V |
| Frequency | 50/60 Hz |
Technical details including voltage, dimensions, weight, and capacity.
Essential guidelines for safe operation and handling of the Superchiller.
Explains the meaning of warning and caution symbols used in the manual.
Criteria for choosing a suitable installation site for optimal performance.
Requirements and safety measures for connecting the Superchiller to power.
Steps to verify and start the Superchiller after installation.
Diagram illustrating the fluid and gas flow for the 3-pump configuration.
To Next Page