Hot Bodies Lightning 2 - User Manual

Detailed steps for the initial engine break-in process, including fuel, priming, and running procedures.

Guidance on adjusting the high-speed needle for optimal engine performance and preventing lean conditions.

Instructions for adjusting the low-speed needle to ensure smooth acceleration and prevent bogging.

How to adjust the idle screw for stable engine idling without engaging the clutch.

Information regarding the factory setting of the midrange needle, with a recommendation not to adjust.

Practical tips for using the plug wrench, handling a flooded engine, and maintaining the air filter.

Guidance on diagnosing and resolving common issues such as engine not starting or stalling.

Essential steps to verify transmitter and receiver function, including power-up sequence and range checks.

Adjusting steering and throttle trim for proper neutral position and straight-line stability.

Safe procedures for starting the engine with a jump-starter and stopping it effectively.