Hotone Mojo Attack User Manual

THANK YOU FOR PURCHASING A HOTONE PRODUCT!
Owner's Manual
INPUT
BOOST
CH A/B
REVERB
SEND
FX LOOP
RETURN
SPEAKER
OUTPUT
BALANCED
OUTPUT
CAB SIM
LINE
OUTPUT
POWER AMP
Signal Path
www.hotoneaudio.com
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always mute the mixer/audio interface or turn down the volume knob on your amp
before plugging or unplugging power jacks, cables, etc.
When you're using a mixer or an audio interface, please adjust the knobs onboard
carefully to avoid signal clipping.
This unit CANNOT be supplied by phantom power.
Specifications
Built-in Boost: Max. +12 dB pure clean boost
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Speaker Output: 4-16Ω, self-adaptive
Max. Output Power (19V):
75 Watts @ 4Ω / 40 Watts @ 8Ω / 20 Watts @ 16Ω
Dimensions: 190mm(D)×118.5mm(W)×53.5mm(H)
Weight: 792g (without PSU)

Hotone Mojo Attack Specifications

General

Brand	Hotone
Model	Mojo Attack
Category	Amplifier
Language	English

Summary

MOJO ATTACK Portable Dual Channel Floor Amplifier

Specifications

Technical details including boost, power, current, speaker output, dimensions, and weight.

Important Usage Notes

Key operational guidelines for safe and optimal use, including power sequence and signal handling.

Amp Controls and Features Overview

Front Panel Controls

Details on channel selection, tone, gain, volume, and effect controls.

Rear Panel Connections

Information on power input, speaker output, FX loop, line outputs, and guitar input.