Hotpoint Ariston HFC 3C26 CW X Daily Reference Guide

56 pages

To Next Page

APPLIANCE

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Cutlery basket

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

DAILY REFERENCE

GUIDE

CONTROL PANEL

Before using the appliance carefully read Safety Instructions.

0000 000 00000

Service:

1. On-O / Reset button with indicator light

2. Program selection button with indicator light

3. Zone Wash 3D button with indicator light / Keylock

4. Eco program indicator light

5. Keylock indicator light

6. Display

7. Program number and remaining time indicator

8. Tablet (Tab) indicator light

9. Closed water tap indicator light

10. Rinse Aid rell indicator light

11. Salt rell indicator light

12. Short Time button with indicator light / Tablet (Tab)

13. Delay button with indicator light

14. Start/Pause button with indicator light / Drain out

PRODUCT DESCRIPTION

THANK YOU FOR BUYING A HOTPOINT ARISTON

PRODUCT. In order to receive a more complete

assistance, please register your appliance on:

www.hotpoint.eu/register

You can download the Safety Instructions and the User

Manual, by visiting our website docs.hotpoint.eu

and

following the Instructions on the back of this booklet.

7 11 12

Other manuals for Hotpoint Ariston HFC 3C26 CW X

Quick Guide24 pages

Questions and Answers:

P
Paul FergusonAug 6, 2025
Why Hotpoint Ariston Dishwasher does not fill with water?
- Y
  youngrebeccaAug 6, 2025
  If your Hotpoint Ariston Dishwasher isn't filling with water, it could be due to several reasons. First, ensure that there is water in the water supply and that the tap is fully open. Secondly, check the inlet hose for any bends, and straighten it if necessary, then reprogram the dishwasher and reboot. Lastly, the sieve in the water inlet hose might be clogged, so clean it. After checking and cleaning, turn the dishwasher off and on, then restart a new program.
C
Cindy HowardAug 20, 2025
What to do if Hotpoint Ariston HFC 3C26 CW X finishes cycle prematurely?
- P
  Philip SnyderAug 20, 2025
  If your Hotpoint Ariston Dishwasher is ending its cycle too early, there are a couple of things you can check. It might be caused by the drain hose being positioned too low, or siphoning into the home sewage system. Make sure the end of the drain hose is at the correct height. Also, check for siphoning into the home sewage system, and install an air admittance valve if needed. Another potential cause is air in the water supply, so inspect the water supply for leaks or other issues that could be letting air inside.

Hotpoint Ariston HFC 3C26 CW X Specifications

General

Type	Freestanding
Appliance placement	Freestanding
Control panel colour	Stainless steel
Built-in display	Yes
Noise emission class	C
Noise Level	46 dB
Number of washing programs	9
Drying system	Static
Drying Efficiency Class	A
Water consumption per cycle	9.5 L
Annual Water Consumption	2660 L
AC input voltage	220-240 V
AC input frequency	50 Hz
Width	600 mm
Depth	600 mm
Height	850 mm
Current	10 A
Delay Start	Yes
Half Load Option	Yes
Weight	47 kg
Inlet hose length	1.55 m
Outlet hose length	1.5 m
Product size	60 cm
Number of place settings	14