Why are the final spin results poor in my Hotpoint Ariston Washer?
Poor final spin results in your Hotpoint Ariston Washer can occur if unbalance during spinning prevented the spin phase. Excessive foam formation might also prevent spinning; in this case, select and start the 'Rinse & Spin' program, and avoid excessive detergent dosing in the future. Also, check if the 'Spin' button has been set to a low spin speed.
What to do if Hotpoint Ariston WMTF722HUK Washer shows 'Service'?
If your Hotpoint Ariston Washer displays 'Service', push the 'Reset' button for at least 3 seconds and wait until the 'Door open' light illuminates. Open the lid and close the drum flaps, then select and start the desired program again. If the fault persists, notify After-Sales Service.
General| Load Capacity | 7 kg |
|---|---|
| Spin Speed | 1200 RPM |
| Energy Efficiency Class | A+++ |
| Number of Programs | 16 |
| Width | 60 cm |
| Depth | 54 cm |
| Height | 85 cm |
| Delay start | Yes |
| Quick wash | Yes |
| Color | White |
General safety guidelines for appliance operation, including indoor use and child supervision.
Instructions for removing all packaging and the transport bracket to prevent damage.
Ensure stable, level placement, connect water supply and drain hose correctly, and check dimensions.
Guidance for safe electrical connection by a qualified technician, adhering to regulations.
Steps to remove the transport bracket and secure outer screws before operation.
Connect the water inlet hose securely to the valve and tap, checking for kinks and leaks.
Connect the drain hose to a siphon or outlet, ensuring correct height and no kinks.
Mandatory earthing of the appliance for safety. Plug must have correct earth continuity.
Explains 'Service' related error codes ('bdd', 'F02'-'F35', 'F09', 'FA', 'Fod') and their solutions.
To Next Page