Hotpoint 18 - Page 10

Aboutcrisperremoval
Not all features are on all models.
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
\,
, ToRemove:
Removing the glass cover
Lift the drawe_ up slightly while pulling
them past the stop location.
If the door prevents you from taking out
the drawe_s, fi_st try to remove the door
bins. If this does not ofl_'r enough
clearance, the refrigerator will need to
be rolled forward tmtil the door opens
enough to slide the (h'awe_ out. In some
cases, when you roll the refi_Jgerator out,
you will need to move the refi_Jgerator
to the left or right as you roll it out.
Toremove the glass cover:
Remove the glass, then the fl'ame. \_l_en
_eplacing the glass, push the fl'ont edge
fimflv into the fl'ame.
0 Push up the glass cover at the teat:
Slide the glass cover backwards tmtil the
fl'ont edge coin es out of the fl'am e.
0 Rotate the side of the glass cover up.
O Remove the glass cox'e_:
) [ jl in _ m _ ,
! i
Removing the frame
Toremove the frame:
0 I,ifl up the fl'ont of the fl'ame using
both hands.
@ Slide the fl'ame fi>rward.
0 Rotate the side of the fl'ame up.
@ Remove the fl'ame.
Aboutthe additional features.
Not all features are on all models.
I i i
i i
ShelfSaver TM Rack
This slide-out rack holds twelve cans of soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
Toremove, slide the rack out to the stop
position, lilt the rack up and past the stop,
and lilt out.
10