The Working of the Heating Zones.
Heating only occurs within the
marked circular cooking zones.
The zones heat up and cool down
quickly providing greater
controllability for sensitive foods.
Each heating zone is equipped with
a thermal limiter which is a safety
cut-out which prevents the ceramic
glass from overheating. After
several minutes at full power
without a pan on the heating zone
the thermal limiter will switch the
heating elements off and on
automatically to avoid any damage
to the ceramic glass.
Choice of Saucepans
It is essential that the saucepans you
use on the ceramic hob are suitable
ALWAYS USE:
● Good quality pans with smooth,flat,
heavy bases
● Saucepans manufactured from
aluminium (enamelled or machined)
or stainless steel
● Correct size saucepans. The base of
the pan must cover the heating zone
completely.
● Saucepans with lids which are well
fitting to reduce cooking time and
energy use.
NEVER USE:
● Pans with thin, distorted or uneven
bases as these will extend cooking
times, waste electricity and cause
damaging, local hotspots on the
glass surface.
● Pans with ridged or recessed bases.
● Pans with damaged or rough bases
which could scratch the glass
surface.
● Glass or glass ceramic utensils.
19
Using the Ceramic Hob
WARNING: DO NOT USE THE HOB IF IT IS CRACKED. SWITCH OFF AT THE
COOKER CONTROL PANEL IMMEDIATELY AND CONTACT YOUR NEAREST
HOTPOINT SERVICE OFFICE (SEE BACK PAGE).
Ratings of Cooking Zones EW81
Front Left Speedglo 1200W 145mm diameter
Front Right Halogen Speedglo Plus 1800W 180mm diameter
Back Left Speedglo (Dual Circuit) 1500W 180mm diameter
Back Right Speedglo 1200W 145mm diameter
EW61 EW62
Front Left Ceramic Plate 1200W 160mm diameter
Front Right Ceramic Plate 1800W 180mm diameter
Back Left Ceramic Plate 1500W 180mm diameter
Back Right Ceramic Plate 1200W 160mm diameter
To Next Page
Loading...
