Hotpoint HM31AAE - Removing the Fan; Replacing the Light

20 of 29
Indesit Company
Service Manual UK English
C) Removing the Fan
1. Remove the 2 plugs covering
the screws.
2. Remove the 2 screws securing
the fan.
3. Unplug the fan from its power
supply.
D) Replacing the Light (Dismantling the Light Holder)
1. Use a slip screwdriver to lift up the outer cover over the light holder screws.
2. Remove the outer cover.
3. Using a slim screwdriver to remove the 2 screws securing the light holder.
This will give direct access to the light and light holder connector, if it needs to be replaced.
1
2
3
1 2
3
4