21 of 29
Indesit Company
Service Manual UK English
PROGRAMMING (Using EMIT)
This machine can be programmed via the Emit, using a USB lead (Part number C00222800), Hardware
key (Part number C00115587) and the Memwriter software.
The Black Hardware Key and USB Serial Cable will be replaced with a new style Hardware Key and
Cable which now has a USB connection. It has shorter, more robust pins, similar to those currently fitted
into the SmartCard Reader. It is not possible to mix old and new cables or keys.
NOTE: - The USB Hardware Key also supports a low voltage connection point which allows an external
power supply to be connected to the Hardware Key which enables the main module to be programmed
with a settings file prior to fitting it to an appliance. ** NOT applicable to UK Service Engineers. Do
not connect anything to this connection point.
USB Hardware Key - C00289048
Black Serial Hardware Key
USB - Serial Cable
Replacement pins for the Hardware Key are
available as Part No. C00114723 (Qty = 1)
Other types of Cable are available
Low Voltage
Connection Point
USB Connection
USB Cable
C00289046
To Next Page
Loading...
