Hotpoint NM111044WCAUKN

To Next Page

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

* By selecting the Spin & Drain cycle and excluding the spin cycle, the washing machine will

drain only.

** The duration of the wash cycles can be checked on the display.

*** For Prewash press the “Temp.” button until the symbol lights up (only 90°).

****

After programme end and spinning with maximum selectable spin speed, in default

programme setting.

4) Eco Cotton - Test wash cycles in compliance with regulations 1061/2010. Set

“Cotton ”

wash cycle at a temperature of 40°C or 60°C to access this cycles.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as the

temperature and pressure of the incoming water, ambient temperature, amount of detergent,

load quantity and type, load balancing and any additional options selected.The values given

for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient

programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note: spin speed values shown on the display can slightly differs from the values stated in the table.

For all testing institutes:

2) Long cotton cycle: set wash cycle Cotton with a temperature of 40°C.

3) Long synthetics cycle: set wash cycle Synthetics with a temperature of 40°C.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

Maximum load 10 kg

Power input in o mode 0.5 W / in left-on mode 8 W

Add

Gar-

ments

(

)

Detergents and

Additives

Recommended

detergent

Residual

dampness % (****)

Energy

consumption kWh

Total water lt

Laundry

temperature °C

Wash cycle

Temperature

Max.

spin speed

(rpm)

Max.

load

(kg)

Dura-

tion

(h : m)

Pre-

wash

Wash

Fabric

softener

Pow-

der

Liquid

Setting Range 1 2 3

Eco 40-60 (1) 40 °C 40°C

1351 10,0 3:59 –



–

   

53 0,88 60 30

1351 5,0 3:00 –



–

   

53 0,63 60 32

1351 2,5 2:35 –



–

   

53 0,38 43 21

Cotton (2)

40°C

- 60°C

1400 10,0 3:50 –



–

   

53 1,08 102 45

Synthetics (3)

40°C

- 60°C

1200 5,5 2:55 –



–

   

35 0,83 56 43

Mixed

40°C

- 40°C

1400 10,0 **

 

–

 

–



– – – –

Delicates

40°C

- 40°C

1000 5,5 **

 

–

 

–



– – – –

White

40°C

- 90°C

1400 10,0 2:05

   (***)    

54 0,90 100 42

Anti Stain 40°

40°C

- 40°C

1000 5,5 **

 

–

   

– – – –

Rapid 30 min

30°C

- 30°C

800 5,5 0:30

 

–

 

–



71 0,21 50 27

Spin & Drain * – – 1400 10,0 ** – – – – – – – – – – –

Rinse & Spin – – 1400 10,0 ** – – – –



– – – – – –

Steam Refresh – – – 2,0 ** – – – – – – – – – – –

20°C 20 °C

- 20 °C

1400 10,0 1:50 –



–

 

–



55 0,20 95 22

Wool

40°C

- 40°C

800 2,5 ** –



–

 

–



– – – –

Anti Allergy 60°C

40°C -

60°C

1400 5,5 ** –



–

   

– – – –

Bed & Bath

60°C

- 60°C

1400 10,0 **

 

–

   

– – – –

 Dosing required  Dosing optional

Eco Cotton (4)

(Cotton

)

60 °C 60 °C 1400 10,0 3:25 –



–

   

53 0,97 58 –

40 °C 40 °C 1400 10,0 3:50 –



–

   

53 1,08 102 –

DETERGENT DISPENSER DRAWER

compartment 1: Pre-wash detergent

(powder)

compartment 2: Detergent for the wash

cycle (powder or liquid)

If liquid detergent is used, it is recommended

that the removable plastic partition A

(supplied) be used for proper dosage.

If powder detergent is used, place the partition

into slot B.

compartment 3: Additives (fabric softeners,

etc.)

The fabric softener should not overow the grid.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

1. STEAM HYGIENE / MUTE button

2. FINAL CARE / KEY LOCK button

3. ON/OFF button

4. ACTIVE CARE button and indicator light

5. START/PAUSE button

6. RAPID / GREEN button

7. SPIN button

8. START DELAY button

9. TEMPERATURE button

10. WASH CYCLE SELECTOR KNOB

1 2

DISPLAY

Need help?

Do you have a question about the Hotpoint NM111044WCAUKN and is the answer not in the manual?

This document describes the Hotpoint washing machine, a front-loading appliance designed for domestic laundry. It emphasizes user-friendliness, energy efficiency, and a variety of wash programs to cater to different fabric types and soiling levels.

Function Description

The Hotpoint washing machine is designed to efficiently clean various types of laundry using a combination of water, detergent, and mechanical action. It features a range of pre-set wash cycles, adjustable temperature and spin speed settings, and special functions like Steam Hygiene and Active Care for enhanced cleaning and fabric care. The machine automatically dispenses detergent and additives from a dedicated drawer. Its control panel allows users to select programs, adjust settings, and monitor the wash cycle progress via a digital display. The appliance also incorporates safety features such as a key lock and a system to detect and manage unbalanced loads.

Important Technical Specifications

Maximum Load: 10 kg, suitable for large households.
Power Input (Off Mode): 0.5 W, indicating low standby power consumption.
Power Input (Left-on Mode): 8 W.
Spin Speed: Up to 1400 rpm, offering efficient water extraction for faster drying times. Specific cycles may have lower maximum spin speeds (e.g., Synthetics at 1200 rpm, Delicates at 1000 rpm, Wool at 800 rpm).
Temperature Range: Adjustable from cold (indicated by a snowflake symbol) up to 90°C, accommodating various fabric care requirements.
Energy Efficiency: Features "Eco 40-60" and "Eco Cotton" programs, compliant with EU Ecodesign regulation 2019/2014 and regulations 1061/2010 respectively, designed for optimal energy and water consumption for normally soiled cotton laundry.
Detergent Dispenser: Three compartments for pre-wash detergent (powder), main wash detergent (powder or liquid), and additives (fabric softeners, etc.). Includes a removable plastic partition for liquid detergent dosage.
Control Panel Components:
- STEAM HYGIENE / MUTE button: Activates steam for hygiene or mutes acoustic signals.
- FINAL CARE / KEY LOCK button: Provides anti-crease treatment or locks the control panel.
- ON/OFF button: Powers the machine on or off.
- ACTIVE CARE button and indicator light: Activates the Active Care function for improved stain removal.
- START/PAUSE button: Initiates or pauses the selected wash cycle.
- RAPID / GREEN button: Reduces cycle duration or activates the Rapid function.
- SPIN button: Adjusts spin speed or selects the "Spin & Drain" cycle.
- START DELAY button: Sets a delayed start time for the wash cycle.
- TEMPERATURE button: Adjusts wash temperature.
- WASH CYCLE SELECTOR KNOB: Used to choose from various wash programs.
Display: Digital display shows cycle duration, remaining time, error codes, and selected options.

Usage Features

Wash Cycle Selection: A wide range of programs is available via the selector knob, including:
- Eco 40-60: Standard program for normally soiled cotton.
- Cotton: For cotton garments, adjustable temperature up to 60°C.
- Synthetics: For synthetic fabrics, adjustable temperature up to 60°C.
- Mixed: For mixed loads, up to 40°C.
- Delicates: For delicate garments, up to 40°C.
- White: For white cottons, up to 90°C, with pre-wash option.
- Anti Stain 40°: For heavily soiled garments with persistent stains, up to 40°C.
- Rapid 30 min: Quick wash for lightly soiled items, up to 30°C.
- Spin & Drain: Drains water and spins laundry.
- Rinse & Spin: Rinses and spins laundry.
- Steam Refresh: Refreshes garments with steam, removing odors and relaxing fibers.
- 20°C: Low-temperature wash for lightly soiled cottons.
- Wool: For wool garments, up to 40°C.
- Anti Allergy: For allergy sufferers, up to 60°C.
- Bed & Bath: For towels and bed linen, up to 60°C.
- Eco Cotton: Energy-efficient cotton programs at 40°C or 60°C.
Detergent Dispenser: Clearly marked compartments for pre-wash, main wash, and additives. The removable partition for liquid detergent ensures correct dosage.
Adjustable Settings: Users can customize temperature, spin speed, and add options like "Pre-wash" (for White cycle), "Rapid," "Steam Hygiene," "Active Care," "Start Delay," and "Key Lock" to suit specific laundry needs.
Start Delay: Allows users to program the start of a wash cycle for a later time, up to 24 hours.
Key Lock: Prevents accidental changes to settings, particularly useful in households with children.
Steam Hygiene: Injects steam into the drum to remove up to 99.9% of bacteria without chemical additives.
Active Care: Pre-mixes water and detergent to create a powerful cleaning mousse that penetrates fibers more effectively, enhancing stain removal.
Rapid Function: Reduces the duration of the wash cycle, suitable for lightly soiled items.
Final Care: Provides a gentle tumbling action at the end of the cycle to minimize creasing.
Display Information: The display shows remaining cycle time, selected options, and error codes for troubleshooting.
Acoustic Signals: Provides audible feedback for button presses and end of cycle, which can be muted.

Maintenance Features

Detergent Dispenser Drawer Cleaning: The drawer can be easily removed and cleaned under running water to prevent detergent build-up.
Drain Pump Filter Cleaning: The drain pump filter, located behind the removable plinth, should be cleaned regularly to prevent blockages and ensure proper drainage. Instructions for access and cleaning are provided.
Water Inlet Hose Filter Cleaning: Filters on the water inlet hose should be checked and cleaned periodically to prevent blockages from sediment.
Appliance Exterior Cleaning: The exterior can be cleaned with a soft, damp cloth. Abrasive cleaners or solvents should be avoided.
Drum Cleaning: The machine may feature a self-cleaning program or recommend periodic cleaning to maintain hygiene and prevent odors.
Anti-Microbial Seal: The porthole seal is made from a special mixture containing an anti-microbial component to reduce bacterial proliferation and unpleasant odors.
Transport Bolts: Emphasizes the critical importance of removing transport bolts before first use to prevent damage to the machine. Instructions are provided in the installation guide.
Troubleshooting Guide: A comprehensive table in the manual helps users diagnose and resolve common issues (e.g., machine not starting, not filling with water, not draining, excessive vibrations, leaks, error codes, too much foam, unbalanced loads) before contacting technical assistance.
Technical Assistance: Provides contact information and guidance on how to obtain support, including details on where to find model information (adhesive label inside the door, QR code on energy label).
Documentation Access: Users can download safety, installation, operating manuals, technical sheets, and energy data via a website, QR code, or by contacting technical assistance.