Hotpoint TCFS 73B - User Manual

Need help?

Do you have a question about the Hotpoint TCFS 73B and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is an instruction booklet for the Hotpoint TCFS 73B and TCFS 735B Tumble Dryers. It provides comprehensive information on installation, warnings, care and maintenance, control panel operation, start-up procedures, available programmes, options, troubleshooting, and assistance.

Function Description:

The Hotpoint TCFS 73B and TCFS 735B are tumble dryers designed for domestic use, intended to dry washed laundry. The appliance uses heat and tumbling action to remove moisture from fabrics. It features various programmes tailored for different fabric types and drying needs, including options for specific dryness levels, anti-allergy treatment, and crease care. The dryer is equipped with a water collection system that condenses moisture from the laundry into a container, eliminating the need for external venting in most installations.

Important Technical Specifications:

Maximum Load Size: 7 kg for most programmes, with specific programmes having smaller maximum loads (e.g., 3 kg for Synthetics, 1 kg for Wool, 0.5 kg for Silk, 2 kg for Baby Delicate).
Power Consumption (Standard Cotton Programme - 7 kg load):
- Off-mode (Po): 0.14 Watts
- Left-on mode (Pl): 2.12 Watts
- Energy Consumption (kWh): 4.25 kWh
- Duration: 127 minutes
Power Consumption (Standard Cotton Programme - 3.5 kg load):
- Energy Consumption (kWh): 2.31 kWh
- Duration: 74 minutes
Power Consumption (Synthetics Programme - 3 kg load):
- Energy Consumption (kWh): 1.38 kWh
- Duration: 65 minutes
Reference Programme for Energy Label: "Standard cotton" is the most efficient programme in terms of energy consumption for drying wet cotton laundry.
Electrical Connection: Requires an earthed socket capable of withstanding the machine's maximum power output. Voltage must fall within the values indicated on the data plate. Extension leads and multiple plug adaptors are not recommended.
Drain Tube Height: If plumbed into a drain, the drain tube must be less than 1 meter from the bottom of the dryer.
Installation Clearances: If installed below a worktop, ensure 10 mm clearance above and 15 mm clearance on the sides for adequate air circulation. The rear surface must be placed against a wall.

Usage Features:

Programme Selection: A programme selection knob allows users to choose from a variety of drying cycles, including:
- Ready to Wear (Max load): For cotton garments ready to wear (130 minutes).
- Standard Cotton (Max load): For normally wet cotton laundry, the most efficient programme for energy consumption (120 minutes for max load, 74 minutes for 3.5 kg).
- Cotton Iron Dry (Max load): For cotton garments intended for easier ironing (90 minutes).
- Shirts (3 kg): For cotton or cotton blend/synthetics shirts (75 minutes).
- Anti Allergy (Max load): "Allergy UK" approved cycle for effective reduction and elimination of allergens, usable with damp or dry loads (170 minutes).
- Synthetics (3 kg): For synthetic fibres (75 minutes).
- Jeans (3 kg): For cotton jeans-wear and robust cotton garments (100 minutes).
- Wool (1 kg): For wool clothing, advisable to turn garments inside out (60 minutes).
- Silk (0.5 kg): Gentle drying of silk garments (60 minutes).
- Baby Delicate (2 kg): For new-born baby garments and delicate items (85 minutes).
- Short 30' / Long 60': Timed drying programmes.
- Cuddly Toy (2.5 kg): Preserves the appearance of cuddly toys, max 600g per piece (200 minutes).
- Heat & Enjoy: Heats towels & bathrobes or clothes to 37°C for a warm sensation (up to 4 hours).
- Easy Iron: Extends fibres to make ironing easier for small loads of cotton textiles or blends (15 minutes).
- Refresh: Short programme for refreshing fibres with fresh air (20 minutes).
Options:
- High Heat: Improves drying capacity for tough garments and timed cycles.
- Quick Dry: Enables quicker drying.
- Crease Care: Offers pre-care (during delayed start) and post-care (after drying cycle) tumbling to prevent creases.
- Delay Timer: Allows setting a delayed start for the cycle.
Control Panel: Features an ON/OFF button, programme selection knob, option buttons with indicator lights, START/PAUSE button with indicator light, and various "Maintenance" and "Drying phases" indicator lights (Clean Filter, Empty Water, Clean Condenser, Drying, Cooling, END).
Standby Mode: The dryer enters an automatic standby system after 30 minutes of inactivity to save energy.
Safety Features: Designed with international safety standards in mind. Includes warnings against overloading, drying items with flammable substances or foam rubber, and improper installation. Children aged 8 and above can use it with supervision.

Maintenance Features:

Filter Cleaning: The filter, located in front of the dryer seal, must be cleaned after each drying cycle. It can be rinsed under running water or cleaned with a vacuum cleaner. A "Clean filter" indicator light reminds the user.
Water Container Emptying: The water container must be emptied after each cycle. An "Empty water container" indicator light signals when it needs emptying. The system requires priming (1-2 cycles) when new.
Condenser Unit Cleaning: The condenser unit should be removed and cleaned regularly (monthly) by rinsing off fluff deposits with cold water. A "Clean condenser unit" indicator light reminds the user.
Drum Cleaning: The drum should be checked manually after each cycle for small items. Avoid using abrasives or steel wool.
External Cleaning: External metal, plastic, and rubber parts can be cleaned with a damp cloth.
Air Intake Grille Cleaning: The front air intake grille should be cleaned regularly (every 6 months) with a vacuum cleaner to remove lint and dust.
Troubleshooting Guide: The manual provides a detailed troubleshooting section to help users resolve common issues before contacting technical assistance.