Hotpoint WD63 - User Manual

INSTRUCTIONS FOR INSTALLATION & USE
WD63,WD64
Hotpoint recommends, for your own safety and to ensure you get the best possible results from your Washer
Dryer, you read through this booklet and follow these steps thoroughly.
Choose a location for your washer dryer,
where possible on a solid floor, with the
electrical sockets and water supply taps
easily accessible.
Allow sufficient space: 600mm width,
600m depth and 900mm height.
DO NOT install in a bath or shower
room.
Dispose of packaging material in a safe
place and remove any labels.
Please read through thoroughly to
ensure you understand each stage
before you begin.
Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.
Keep these instructions in a safe place for quick reference.
STEP 1 STEP 2
A wash chart is provided to help you to
select your required programme.
Examples given for the maximum
washing load weight for different fabric
types.
STEP 4
WARNING: This appliance must be earthed.
Remember you may be charged for a service call if a
problem with your washer dryer is caused by
incorrect installation or misuse.
Electrical Guide Installation Guide
Wash Guide
Read through this section to familiarise
yourself with the different
compartments within the dispenser
drawer.
STEP 3
Dispenser Drawer
NOTE: Always follow manufacturer’s dosage
recommendations.
A guide to drying times is provided for
independent drying programmes, along
with a list of items not suitable for
tumble drying.
Examples given for the maximum drying
load weight for different fabric types.
STEP 6
Drying Guide
All available optional wash features are
explained within this section - These
allow you to adjust your selected wash
programme to suit your needs.
STEP 5
Options Guide
NOTE: In addition to the temperature of the
incoming water, the selection of optional wash
features will affect the programme times.
Hotpoint recommend the Persil range of
detergent products.
STEP 8
Troubleshooting
A picture guide provides a clear
explanation how to set a wash and auto
dry programme.
DO NOT overload the washer dryer.
STEP 7
Wash & Auto Dry Programme
NOTE: Hotpoint recommend, on completion of
your programme,that you switch off both the
electricity and water supply to the appliance.
Please refer to the Troubleshooting
section if you have any problems when
using your washer dryer.
There may be nothing wrong!
NOTE: Always make sure the mains button is in the
OFF position before selecting an independent
drying programme.
READ BEFORE
CONTACTING
SERVICE!

Summary

STEP 1 Electrical Guide

Fuses

Changing the Mains Lead

Changing the Plug

STEP 2 Installation Guide

Levelling the Appliance

Remove Transit Brackets

Essential step to remove internal transit brackets to prevent damage during use.

Connect to Power Supply

Instructions for plugging the machine into an accessible electrical socket.

Drainage System

Guidance on setting up the drainage system using either a standpipe or under sink method.

STEP 7 Wash & Auto Dry Programme

Drying Dial

STEP 8 Troubleshooting

Machine Noise or Vibrates

Troubleshooting steps for noise or vibration issues during spin programmes.

Machine Will Not Start

Steps to diagnose and resolve issues when the washing machine does not start.

Machine Stops Before Spin

Troubleshooting for when the machine halts before the spin cycle.

Laundry Not Spun Dry

Guidance if laundry is not adequately spun dry after a wash programme.

Machine Does Not Pump Out Water

Steps to identify and fix problems related to water not being pumped out.

Machine is Leaking

Troubleshooting steps for identifying and resolving water leaks from the appliance.

Programme Takes a Long Time

Suds Are Coming From Dispenser Drawer

Laundry Is Not Dry After Programme

Troubleshooting if laundry remains wet after using a drying programme.

Out Of Balance

Explanation of 'out of balance' loads and how to correct them.

After Sales Service

Repair Service and Information Help Desk

Contact details and information for after-sales service and repairs.

Hotpoint WD63 Specifications

General

Brand	Hotpoint
Model	WD63
Category	Washer/Dryer
Language	English