EasyManua.ls Logo

Hotpoint WD640 User Manual

Hotpoint WD640
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions
WD645
WD640
Question and Answer IconNeed help?

Do you have a question about the Hotpoint WD640 and is the answer not in the manual?

Hotpoint WD640 Specifications

General IconGeneral
BrandHotpoint
ModelWD640
CategoryWasher/Dryer
LanguageEnglish

Summary

Installation

Starting and Programmes

On-Off / Selecting a programme

Step-by-step guide to switching on and selecting a wash programme.

To stop or change a programme

Instructions on how to pause, stop, or alter a running programme.

Programmes table

A table detailing available programmes, fabric types, temperatures, and load sizes.

Drying

Precautions and advice

General safety

Important safety warnings for operating the appliance.

Care and maintenance

Troubleshooting

The machine won't start?

Common causes and solutions for the machine failing to start.

The wash cycle won't start?

Troubleshooting steps if the wash cycle does not initiate.

The machine fails to fill with water?

Solutions for issues related to the machine not filling with water.

The machine does not drain or spin?

Addressing problems with the drain or spin functions.

The machine makes a noise or vibrates too much during the spin cycle?

Identifying causes for excessive noise or vibration during spinning.

The machine leaks?

Troubleshooting steps for leaks from the appliance.

The laundry is not dry after using the dry programme?

Solutions if laundry remains damp after a drying cycle.

Steam is coming from the dispenser drawer

Explanation for steam release from the dispenser during hot washes.

There is too much foam?

Addressing excessive foam formation during washing.

The detergent dispenser will not close properly or is collecting water?

Resolving issues with the detergent dispenser not closing or retaining water.

Not all the detergent has been flushed away?

Troubleshooting steps if detergent is not fully rinsed away.

Related product manuals