EasyManua.ls Logo

Hotpoint WMA10 - Understanding Programme Indicator Lights

Hotpoint WMA10
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNINGS:
Do not try to
open the
door while
the ‘Door
Locked’
indicator light
is on.
Programme
End Light
Programme
Active Light
OFF position
Door Lock
Indicator Light
Wash programmes
PROGRAMMES
AND OPTIONS
16
The ‘Active Indicator light
As soon as the selected programme has started the Active
indicator light will glow. This light will remain lit throughout
the programme and will go out when the programme has
finished.
Door Locked Indicator light
The ‘Door Lockedindicator light will come on two seconds
after you press the START/Hold To Reset button and will
stay lit throughout the programme. A short time after the
programme has finished the Door Locked indicator light will
go out and you can then open the door.
Door not closed
The programme will not start if the door is not closed
properly, the ‘Door Lockedindicator light will be flashing to
show this. Please make sure that the door is properly closed
by pushing it until you hear the catch click.
The ‘Prog End’ Indicator light
After the selected programme has finished the Prog End
indicator light will glow. It will remain lit until you return the
programme selector dial to its OFF position or start another
programme.

Related product manuals