EasyManua.ls Logo

Hotpoint WMAO 743 - User Manual

Hotpoint WMAO 743
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GB
1
English,1
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 6
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 7
General safety
Disposal
Description of the washing machine, 8-9
Control panel
Display
Running a wash cycle, 10
Wash cycles and functions, 11
Table of wash cycles
Wash functions
Detergents and laundry, 12
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system
Troubleshooting, 13-14
Product Guarantee and Repair Informa-
tion, 15
GB
WMAO 743
Instructions for use
WASHING MACHINE
Question and Answer IconNeed help?

Do you have a question about the Hotpoint WMAO 743 and is the answer not in the manual?

Summary

Installation

Unpacking and levelling

Details on how to unpack the appliance and ensure it is level for optimal operation.

Connecting the water inlet hose

Instructions for connecting the water supply hose to the washing machine and tap.

Connecting the drain hose

Guidance on correctly connecting the drain hose to a suitable outlet or trap.

Electric connection

Steps for safely connecting the washing machine to the electrical supply.

The first wash cycle

Procedure for running an initial wash cycle before first use with laundry.

Technical data

Care and maintenance

Cutting off the water and electricity supplies

Steps to safely disconnect water and power before cleaning or maintenance.

Cleaning the washing machine

Instructions for cleaning the exterior and rubber components of the appliance.

Cleaning the detergent dispenser drawer

Detailed steps for removing and cleaning the detergent dispenser drawer.

Caring for the door and drum of your appliance

Advice on leaving the door ajar to prevent odours and general care.

Cleaning the pump

How to access and clean the pump's pre-chamber for debris.

Checking the water inlet hose

Annual check for cracks and advice on replacing the water inlet hose.

Precautions and tips

General safety

Important safety guidelines for operating and using the washing machine.

Disposal

Information on how to dispose of packaging and the old appliance responsibly.

Description of the washing machine

Control panel

Overview of the buttons, functions, and indicators on the washing machine's control panel.

Display

Explanation of the information displayed on the screen during operation.

Running a wash cycle

Modifying the temperature and;or spin speed

How to adjust temperature and spin speed settings for a wash cycle.

Setting a delayed start

Guide to setting a delayed start timer for a selected wash programme.

Modifying the cycle settings

Instructions for enabling or disabling specific wash functions.

START THE PROGRAMME

How to start, pause, and resume a wash cycle using the START/PAUSE button.

THE END OF THE WASH CYCLE

Information on how the cycle end is indicated and how to open the door.

Wash cycles and functions

Table of wash cycles

Details of available wash cycles, including temperature, speed, load, and duration.

Wash functions

Explanation of additional functions like Super Wash, Reduced Creases, Extra Rinse, and Time Saver.

Detergents and laundry

Detergent dispenser drawer

Guidance on using the correct detergent compartment and amount.

Preparing the laundry

Tips on sorting, checking pockets, and weighing laundry before washing.

Special wash cycles

Descriptions of special cycles like Cotton 20°, Baby, Bed&Bath, Wool, Silk, and Curtains.

Load balancing system

Explanation of how the load balancing system works and how to improve it.

Troubleshooting

The machine does not switch on.

Troubleshooting steps for when the washing machine fails to power on.

The wash cycle does not start.

Solutions for issues preventing the wash cycle from initiating.

The machine does not fill with water or NO WATER CHECK SUPPLY appears on the display.

Diagnosing and resolving problems related to water filling issues.

The machine does not drain or spin or F05 error code in the display.

Solutions for drainage or spinning failures, including error code F05.

The machine does not heat or poor wash results.

Addressing issues with water heating or suboptimal washing performance.

The programme takes too long or The Display changes the estimated Time to End during the programme.

Understanding why programme times vary or the display estimate changes.

The machine vibrates a lot during the spin cycle.

Causes and solutions for excessive vibration during the spin cycle.

The machine is noisy.

Common causes for noise during the spin cycle and general operation.

The machine wont spin properly.

Troubleshooting tips for spin cycles that do not complete or function correctly.

The machine leaks from the dispenser.

Identifying and fixing leaks originating from the detergent dispenser.

The machine leaks (other than dispenser).

Resolving leaks from other parts of the washing machine.

The indicator lights on the console are flashing rapidly.

Steps to take when console indicator lights flash indicating an issue.

The machine smells.

How to address unpleasant odours from the washing machine.

The machine door cannot be opened.

Solutions for situations where the washing machine door remains locked.

Door Seal damaged at the bottom.

Notes on the door seal's drainage holes and their normality.

The water level is too low when the machine is washing.

Checking water levels and potential causes for them being too low.

There is too much foam.

Causes of excessive foam and advice on detergent usage.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

Troubleshooting the machine turning off unexpectedly or showing no lights.

Product Guarantee and Repair Information

Guarantee

Details of the 12 Months Parts and Labour Guarantee and its conditions.

Recycling and Disposal Information

Information on responsible disposal of packaging and old appliances.

Repairs and After Sales

Contact details for product help, repairs, spare parts, and accessories.

Summary

Installation

Unpacking and levelling

Details on how to unpack the appliance and ensure it is level for optimal operation.

Connecting the water inlet hose

Instructions for connecting the water supply hose to the washing machine and tap.

Connecting the drain hose

Guidance on correctly connecting the drain hose to a suitable outlet or trap.

Electric connection

Steps for safely connecting the washing machine to the electrical supply.

The first wash cycle

Procedure for running an initial wash cycle before first use with laundry.

Technical data

Care and maintenance

Cutting off the water and electricity supplies

Steps to safely disconnect water and power before cleaning or maintenance.

Cleaning the washing machine

Instructions for cleaning the exterior and rubber components of the appliance.

Cleaning the detergent dispenser drawer

Detailed steps for removing and cleaning the detergent dispenser drawer.

Caring for the door and drum of your appliance

Advice on leaving the door ajar to prevent odours and general care.

Cleaning the pump

How to access and clean the pump's pre-chamber for debris.

Checking the water inlet hose

Annual check for cracks and advice on replacing the water inlet hose.

Precautions and tips

General safety

Important safety guidelines for operating and using the washing machine.

Disposal

Information on how to dispose of packaging and the old appliance responsibly.

Description of the washing machine

Control panel

Overview of the buttons, functions, and indicators on the washing machine's control panel.

Display

Explanation of the information displayed on the screen during operation.

Running a wash cycle

Modifying the temperature and;or spin speed

How to adjust temperature and spin speed settings for a wash cycle.

Setting a delayed start

Guide to setting a delayed start timer for a selected wash programme.

Modifying the cycle settings

Instructions for enabling or disabling specific wash functions.

START THE PROGRAMME

How to start, pause, and resume a wash cycle using the START/PAUSE button.

THE END OF THE WASH CYCLE

Information on how the cycle end is indicated and how to open the door.

Wash cycles and functions

Table of wash cycles

Details of available wash cycles, including temperature, speed, load, and duration.

Wash functions

Explanation of additional functions like Super Wash, Reduced Creases, Extra Rinse, and Time Saver.

Detergents and laundry

Detergent dispenser drawer

Guidance on using the correct detergent compartment and amount.

Preparing the laundry

Tips on sorting, checking pockets, and weighing laundry before washing.

Special wash cycles

Descriptions of special cycles like Cotton 20°, Baby, Bed&Bath, Wool, Silk, and Curtains.

Load balancing system

Explanation of how the load balancing system works and how to improve it.

Troubleshooting

The machine does not switch on.

Troubleshooting steps for when the washing machine fails to power on.

The wash cycle does not start.

Solutions for issues preventing the wash cycle from initiating.

The machine does not fill with water or NO WATER CHECK SUPPLY appears on the display.

Diagnosing and resolving problems related to water filling issues.

The machine does not drain or spin or F05 error code in the display.

Solutions for drainage or spinning failures, including error code F05.

The machine does not heat or poor wash results.

Addressing issues with water heating or suboptimal washing performance.

The programme takes too long or The Display changes the estimated Time to End during the programme.

Understanding why programme times vary or the display estimate changes.

The machine vibrates a lot during the spin cycle.

Causes and solutions for excessive vibration during the spin cycle.

The machine is noisy.

Common causes for noise during the spin cycle and general operation.

The machine wont spin properly.

Troubleshooting tips for spin cycles that do not complete or function correctly.

The machine leaks from the dispenser.

Identifying and fixing leaks originating from the detergent dispenser.

The machine leaks (other than dispenser).

Resolving leaks from other parts of the washing machine.

The indicator lights on the console are flashing rapidly.

Steps to take when console indicator lights flash indicating an issue.

The machine smells.

How to address unpleasant odours from the washing machine.

The machine door cannot be opened.

Solutions for situations where the washing machine door remains locked.

Door Seal damaged at the bottom.

Notes on the door seal's drainage holes and their normality.

The water level is too low when the machine is washing.

Checking water levels and potential causes for them being too low.

There is too much foam.

Causes of excessive foam and advice on detergent usage.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

Troubleshooting the machine turning off unexpectedly or showing no lights.

Product Guarantee and Repair Information

Guarantee

Details of the 12 Months Parts and Labour Guarantee and its conditions.

Recycling and Disposal Information

Information on responsible disposal of packaging and old appliances.

Repairs and After Sales

Contact details for product help, repairs, spare parts, and accessories.

Hotpoint WMAO 743 Specifications

General IconGeneral
BrandHotpoint
ModelWMAO 743
CategoryWasher
LanguageEnglish

Related product manuals