Hotpoint WMAO 963 - User Manual

To Next Page

English,1

Contents

Installation, 2-3-4-5

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 6

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 7

General safety

Disposal

Description of the washing machine, 8-9

Control panel

Display

Running a wash cycle, 10

Wash cycles and functions, 11

Table of wash cycles

Wash functions

Detergents and laundry, 12

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 13-14

Assistance, 15-16

WMAO 963

Instructions for use

WASHING MACHINE

Need help?

Do you have a question about the Hotpoint WMAO 963 and is the answer not in the manual?

This document provides comprehensive instructions for the Hotpoint WMAO 963 washing machine, covering installation, operation, maintenance, and troubleshooting.

Function Description:

The Hotpoint WMAO 963 is a fully automatic washing machine designed for domestic use. It offers a variety of wash cycles and functions to cater to different laundry needs, from heavily soiled whites to delicate silks and wools. The machine features a user-friendly control panel with a display that provides information on the selected wash cycle, remaining time, temperature, and spin speed.

Key functions include:

ON/OFF button: To switch the machine on or off.
WASH CYCLE SELECTOR buttons: To choose from a range of pre-set wash cycles.
MEMORY button: To store and recall a customised wash cycle.
FUNCTION buttons: To select additional wash functions like "Super Wash," "Reduced Creases," "Extra Rinse," "Time Saver," and "Eco Wash."
SPIN button: To adjust or exclude the spin cycle.
TEMPERATURE button: To decrease the wash temperature.
CHILD LOCK button: To lock the control panel and prevent accidental changes.
DELAY START button: To set a delayed start time for a wash cycle.
START/PAUSE button: To start, pause, or resume a wash cycle.
Display: Provides real-time information on the wash cycle progress, remaining time, selected temperature, and spin speed. It also indicates when the door is locked.

The machine incorporates a load balancing system that rotates the drum continuously before each spin cycle to distribute the load evenly, reducing vibrations and noise. If the load remains unbalanced after several attempts, the machine will spin at a reduced speed or perform a distribution process instead of spinning.

Important Technical Specifications:

Model: WMAO 963 (WMAO 963P UK for the EU market)
Dimensions: Width 59.5 cm, Height 85 cm, Depth 60 cm
Capacity: 1 to 9 kg of cotton
Drum Capacity: 62 litres
Energy Efficiency Class (EU No 1061/2010): A+++
Energy Consumption per year: 216 kWh (based on 220 standard washing cycles)
Water Consumption per year: 12254 litres (based on 220 standard washing cycles)
Maximum Spin Speed: Up to 1600 rotations per minute
Spin-drying Efficacy Class: A
Noise (washing): 53 dB(A) re 1 pW
Noise (spinning): 80 dB(A) re 1 pW
Water Connections: Maximum pressure 1 MPa (10 bar), Minimum pressure 0.05 MPa (0.5 bar)
Electrical Connections: Refer to the technical data plate fixed on the machine. The appliance is supplied with a 13 amp fused plug and requires an earthed socket.
Compliance: Conforms to EC Directives 2004/108/EC (Electromagnetic Compatibility), 2006/95/EC (Low Voltage), and 2012/19/EU (WEEE).

Usage Features:

Installation: Requires unpacking, levelling on a flat, sturdy floor, and connecting to cold water and electricity supplies. The drain hose should be connected to a draining duct or sink trap between 65 and 100 cm from the floor.
First Wash Cycle: Before first use, run a wash cycle with detergent and no laundry, setting the 90°C programme (1st press of the button).
Loading Laundry: Open the porthole door and load laundry, ensuring not to exceed the maximum load indicated in the wash cycle table.
Detergent Dispenser Drawer: Designed with compartments for detergent (powder or liquid) for the wash cycle and additives (fabric softeners). Liquid detergent should be poured in just before the programme starts.
Wash Cycles: A comprehensive table of wash cycles is provided, including "Cotton," "Eco Cotton," "Synthetics," "Fastwash 60'," "Fastwash 30'," "Baby Cycle," "Bed & Bath," "Wool," "Silk," "Spin," "Rinse," and "Pump out." Each cycle has recommended temperatures, spin speeds, and maximum load capacities.
Customisation: Users can modify temperature and spin speed for most cycles, set a delayed start, and select various functions to enhance washing performance or save energy.
Standby Mode: The machine automatically enters standby mode after 30 minutes of inactivity to comply with energy-saving regulations.

Maintenance Features:

Water and Electricity Supply: Turn off the water tap after each wash cycle and unplug the machine during cleaning or maintenance.
Cleaning the Washing Machine: Clean outer parts and rubber components with a soft cloth and lukewarm soapy water. Do not use solvents or abrasives.
Cleaning the Detergent Dispenser Drawer: Remove and wash the drawer under running water frequently to prevent build-up.
Caring for the Door and Drum: Leave the porthole door ajar after use to prevent unpleasant odours.
Cleaning the Pump: The machine has a self-cleaning pump. To access the pre-chamber for removing small items, use a screwdriver to remove the cover panel on the lower front part of the machine, then unscrew the lid of the pre-chamber. Ensure the wash cycle has finished and the appliance is unplugged before cleaning.
Checking the Water Inlet Hose: Inspect the inlet hose at least once a year for cracks and replace it if necessary. Do not use second-hand hoses.
Troubleshooting: A detailed troubleshooting guide is provided to help resolve common issues such as the machine not switching on, not starting a wash cycle, not filling with water, continuous filling/draining, not draining/spinning, not heating, long programme times, or excessive vibrations.
Assistance: Contact information for Hotpoint Service is provided for technical assistance, parts and accessories, and appliance registration. Users are advised that service calls for problems caused by incorrect installation may be charged.
Disposal: Packaging materials should be recycled according to local regulations. Old appliances, marked with the crossed-out wheeled bin symbol, must be collected separately from unsorted municipal waste to facilitate recovery and recycling. Before disposal, remove the door, plug, and cut the mains cable to prevent accidental injury or use.