Some parts of your Hover-1 Highlander Pro can injure you if
mishandled. Moving and folding parts can cut skin. Clamps and
pivoting parts such as brake levers can pinch. When folding and
unfolding your Hover-1 Highlander Pro, Please watch for pinch points
where possible injury may be sustained. Do not leave your hand in
these areas during folding or unfolding.
PINCH POINTS
LOCKING MECHANISM
After riding the scooter, the locking mechanism may loosen over
time. If you notice the steering column is loose, don’t ride the scooter
until it is fully secured. Use the 2.5 Allen wrench provided to tighten
point “A” (marked below) until the locking mechanism fits securely. If
you are unable to close the mechanism completely, you may need
to loosen “A” slightly until the locking mechanism is able to close
securely.
A
19
To Next Page
Loading...
