PREPARING YOUR RALLY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS
Attach the handle bars by placing them into the appropriate sockets
and twisting them in the correct direction.
COUNTER CLOCKWISE COUNTER CLOCKWISE
NOTE: If the handlebars do not attach flush to the frame, you may
need to shift the location of your throttle and brake assembly
appropriately.
Tighten or loosen the throttle and brake assembly with the included hex
key and make sure they are NOT touching or blocking your handlebars.
FOLDING & UNFOLDING YOUR RALLY.
Pull and hold the release lever, near the front of the foot pad, and lift the
handlebars up to unfold or pull them down to fold. You will hear a click sound
in both directions, this means it's now locked in place.
LEVER
PULL HOLD THE RELEASE
LEVER TO UNLOCK
7
To Next Page
Loading...
