Howard-McCray
A Division of HMC Enterprises, LLC.
831 East Cayuga Street •Philadelphia, PA 19124 USA •(215) 464-6800 •(800) 344-8222
Fax (215) 969-4890 •E-Mail: techservice@howardmccray.com 120215
2
The following instructions are for the benefit of the new owner and the installing contractor.
They should be studied carefully before attempting to install or operate the cabinet.
This manual is the property of the owner and should remain in the owner’s possession.
Engineering Specifications – SR Models
Model No.
Cabinet Dimensions
D x H* x L
Compressor
HP
Electrical Voltage
Max. Amps
Power Cord
Plug (NEMA)
SR22 35 x 83 x 26 1/2 1/4 115/60Hz/1PH 6.8 5-15P
SR48 35 x 83 x 52 1/4 1/3 115/60Hz/1PH 9.6 5-15P
SR75 35 x 83 x 78 1/2 115/60Hz/1PH 12.1 5-20P
* - Includes 5" Casters
or
** = Top mounts does not includes 6" Legs
These cabinets are designed to operate in an air
conditioned location ONLY.
Temperature not to exceed 75
o
F and a relative humidity not to exceed 55%.
To Next Page
Loading...
Need help?
General