Important Notes:
Ensure packaging is disposed of in a safe environmentally friendly way
The kitchen installation manual should be used for information relating to cabinet
installation, hinge and door fitting/adjustment
Tall Corner Larder Unit
HD224070 TCLARDEROP2
Assembly Overview
TCLARDEROP2
Range Specific
Tall Tower Decor End x2
1000mm Base Cabinet x1
150mm Wine Rack x1
400 Larder Unit x1
Top Panel x1
(565mm x 565mm)
decor end
Storage Tray Space
(Side Panel: 502mm x 575mm
Top/Bottom Panel: 114mm x 490mm
Back Panel: 114 x 502mm)
x2 base decor end
Note: Ensure panel sizes are
checked before cutting
Range Specific
400 FH Door x2
Blanking panels are also
required x2 for this assembly
(see step by step guide)
RKC0601
Inner Plinth
x1 Length
210mm
32mm
55mm
Plinth Sections x1/2 Requires ‘notching’
Length 417mm
Wall Decor end
Plinth section can also be ‘stepped back’
from the door to align with adjoining units
as required.
Plinth
Door
x3
30mm
Plinth ‘notch’ at
the back
Cabinet Corner fillet
(2122mm x 104mm)
Tall Tower Decor End
Cornice
x1 Length
Range Specific
400mm Tall Larder Door x2
Tall 150mm Wine Rack x1
400 Larder Top Box x1
Long Infill
(2122mm x 37.5mm)
Tall Tower Decor End
Scan the QR code with your
smart device to access a
digital copy of the
kitchen installation manual
1000mm Larder Top Unit x1
500mm Larder Top Box x1
To Next Page
Loading...
