Howdens RKLENBUOH - User Manual

Important Notes:
Ensure packaging is disposed of in a safe
environmentally friendly way
Please ensure there is sufficient clearance for the drawer to open once flooring has been installed
Built Under Oven Housing
Assembly
1
RKLENBUOH
Fit legs to the inner sides of the cabinet.
2
Fit runners to the inner sides of the cabinet.
Fit cabinet into place and adjust legs as required
Note: These screws are
packed in the cabinet fittings bag
Note: These screws are
packed in the cabinet fittings bag
Leg x4
Runner x2 (LH&RH)
66mm
37mm
224mm
69mm
256mm
Screw x8
30mm csk
Screw x8
4 x 16mm csk
10mm
26mm
HD020160v3
Screw x16
13mm csk
458mm
426mm
97mm
65mm

Summary

Assembly Steps

Fit Legs to Cabinet Sides

Attach the provided legs to the inner sides of the cabinet using screws.

Fit Drawer Runners to Cabinet

Attach the drawer runners to the inner sides of the cabinet as per the diagram.

Prepare and Fit Fascia Brackets

Prepare and attach brackets to the lower fascia (plinth) section.

Fit Upper Fascia Clips

Attach the fascia locking clips to the upper fascia panel.

Fit Fascias to Drawer Box

Secure the upper and lower fascias to the drawer box.

Install Drawer onto Runners

Install the assembled drawer onto the runners and slide it into the cabinet.

Howdens RKLENBUOH Specifications

General

Brand	Howdens
Model	RKLENBUOH
Category	Indoor Furnishing
Language	English