2
Changing cur
rent time, start time, watering frequency or
duration
Turn dial to desired setting and press the relevant button as
instructed above.
NOTE: You do not need to reset all settings.
MANUAL OPERATION
Manual ON
Turn dial anti-clockwise to ON.
Water will flow for 60 minutes maximum or until turned to OFF
setting.
Note: After 60 minutes water shuts off. Knob will still point to ON
and needs to be manually set to OFF or to desired number of
automatic watering minutes.
Manual
OFF
Turn dial clockwise to OFF.
Note: Operation is only audible when valve opens and closes. To
check that timer is working, switch to manual ON or OFF to hear
valve operate.
CONNECTING THE TIMER TO THE TAP
Use supplied adaptors if required. Tighten to ensure no leaks.
PROTECT YOUR WATER TIMER FROM FROST.
REMOVE FROM THE TAP IN WINTER. PRODUCT
NOT GUARANTEED AGAINST FROST DAMAGE.
REMOVE BATTERIES WHEN NOT IN USE.
PROBLEM
Valve opens and closes when
batteries are first inserted but
then fails to operate when dial
is at ON or OFF.
Valve works but no water flows.
Valve works on manual but no
automatic watering.
Knob points to ON but no
watering.
SOLUTION
Your AC+ has detected poor
batteries. Replace with new
ALKALINE batteries.
Check tap is turned on.
Set Auto Start time
Manual ON 60 minutes is
finished. Switch off or turn to
desired automatic watering time.
PROBLEM SOLVING
To Previous Page
Loading...
