HP 10bII - Entering Cash Flows

CF3=10,000,N3=1
CF 2=1,000,N2=3
CFI=0,N1<6
CFO = -11,000
Whenever you enter a series of cash flows, it is important to account for
every period on the cash flow diagram, even periods with cash flows of
zero.
Entering Cash Flows
"The HP 10BII can store an initial cash flow plus 14 additional cash flow
groups. Each cash flow group can have up to 99 cash flows. Enter cash
flows using the following steps:
1. Press QE to clear the resisters.
2. Enter the number of periods per year and press Б).
3. Enter the amount of the initial investment, then press С) (The “j”
stands for the cash flow “number,” 0 through 14.)
4. Enter the amount of the next cash flow and press (Се)
5. If the amount entered in step 4 occurs more than once consecutively,
enter the number of times it occurs, and press OW.
6. Repeat steps 4 and 5 for each Œ) and CS) until all cash flows have
been entered.
78 6: Cash Flow Calculations