42  Section 3: Basic Financial Functions 
 
File name: HP 12c Pt Converted_user's guide_English_HDP0F123E02_080207  Page: 11 of 281   
Printed Date:  {  2007/8/2Dimension: 14.8 cm x 21 cm 
 
Clearing the Financial Registers 
Every financial function uses numbers stored in several of the financial registers. 
Before beginning a new financial calculation, it is good practice to clear all of the 
financial registers by pressing 
f
CLEAR
G
. Frequently, however, you may want 
to repeat a calculation after changing a number in only one of the financial 
registers. To do so, do not press 
f
CLEAR
G
; instead, simply store the new 
number in the register. The numbers in the other financial registers remain 
unchanged.  
The financial registers are also cleared when you press 
f
CLEAR
H
 and when 
Continuous Memory is reset (as described on page 86). 
Simple Interest Calculations 
The hp 12c platinum simultaneously calculates simple interest on both a 360-day 
basis and a 365-day basis. You can display either one, as described below. 
Furthermore, with the accrued interest in the display, you can calculate the total 
amount (principal plus accrued interest) by pressing 
+
 in RPN mode or 
+~}
 in ALG mode. 
1.  Key in or calculate the number of days, then press n. 
2.  Key in the annual interest rate, then press ¼. 
3.  Key in the principal amount, then press Þ$.
*
 
4. Press fÏ to calculate and display the interest accrued on a 360-day 
basis. 
5. If you want to display the interest accrued on a 365-day basis, press 
d~. 
6.  In RPN mode, press + or in ALG mode, press +~} to calculate the 
total of the principal and the accrued interest shown in the display. 
The quantities n, i, and PV can be entered in any order. 
 
*
 Pressing the $ key stores the principal amount in the PV register, which then contains the 
present value of the amount on which interest will accrue. The Þ key is pressed first to 
change the sign of the principal amount before storing it in the PV register. This is required by 
the cash flow sign convention (see page 46), which is applicable primarily to compound 
interest calculations.